FREE TRADE AGREEMENT BETWEEN THE REPUBLIC OF LATVIA AND THE REPUBLIC OF TURKEY

 

PREAMBLE

The Republic of Turkey (hereinafter referred to as "Turkey") and the Republic of Latvia (hereinafter referred to as "Latvia");

RECALLING their intention to participate actively in the process of economic integration in Europe and expressing their preparedness to co-operate in seeking ways and means to strengthen this process;

REFERRING to the Agreement Establishing an Association between Turkey and the European Economic Community and Agreement on Free Trade and Trade-Related Matters between the European Communities and the Republic of Latvia;

HAVING regard to the experience gained from the co-operation developed between the Parties to this Agreement (hereinafter referred to as "the Parties") as well as between them and their main trading partners;

DECLARING their willingness to take action with a view to promoting harmonious development of their trade as well as to expanding and diversifying their mutual co-operation in the fields of common interest, including fields not covered by this Agreement, thus creating a framework and supportive environment based on equality, non discrimination, and a balance of rights and obligations;

RESOLVED to lay down for this purpose provisions aimed at the progressive abolition of the obstacles to trade between the Parties in accordance with the provisions of these instruments, in particular those concerning the establishment of free trade areas;

RECALLING the mutual interest of the Parties in the continual reinforcement of the multilateral trading system and considering their relations to the General Agreement on Tariffs and Trade (herein after referred to as "GATT") and the World Trade Organization (herein after referred to as "WTO"), the provisions and instruments of which constitute a basis for their foreign trade policy;

CONSIDERING the respective commitments of the Parties to free trade and in particular to compliance with the rights and obligations arising out of the GATT and the WTO.

HAVE DECIDED, in pursuance of these objectives, to conclude the following Agreement (hereinafter referred to as "this Agreement"):

ARTICLE 1

Objectives

1. Turkey and Latvia establish a free trade area upon the entry into force of this Agreement, in accordance with the provisions of this Agreement and in conformity with those of the GATT 1994 and the WTO.
2. The objectives of this Agreement are:

1. to promote, through the expansion of reciprocal trade, the harmonious development of the economic relations between the Parties;
2. to provide fair conditions of competition for trade between the Parties;
3. to contribute in this way, by removal of barriers to trade, to the harmonious development and expansion of world trade;
4. to enhance cooperation between the Parties.

ARTICLE 2

Basic Duties

1. For commercial exchanges covered by this Agreement, the Latvian Combined Nomenclature shall be applied to the classification of goods for imports into Latvia. The Turkish Customs Tariffs shall be applied to the classification of goods for imports into Turkey.
2. For each product originating in the Parties the basic duty to which successive reductions set out in this Agreement are to be applied shall be the MFN duty that applied in the Parties, erga omnes, on the date of entry into force of this Agreement.
3. If after entry into force of this Agreement, any tariff reduction is applied on an erga omnes basis, in particular, reductions resulting from the tariff agreement concluded as a result of the GATT Uruguay Round, such reduced duties shall replace the basic duties referred to in paragraph 2 as from that date when such reductions are applied.
4. The Parties shall communicate to each other their respective basic duties.

 

CHAPTER I

INDUSTRIAL PRODUCTS

ARTICLE 3

Scope

1. The provisions of this Chapter shall apply to products falling within Chapters 25 to 97 of Harmonized Commodity Description and Coding System with the exception of the products listed in Annex I.

ARTICLE 4

Customs Duties on Imports and Charges Having Equivalent Effect

1. No new customs duty on imports or charge having equivalent effect shall be introduced in trade between the Parties from the date of entry into force of this Agreement.
2. The Parties shall abolish on their imports from each other all customs duties and charges having equivalent effect on imports on the date of entry into force of this Agreement, with the exception of those listed in Annex II.
3. Customs duties for products originating in the Parties which are listed in Annex II to this Agreement shall be abolished in accordance with the conditions set out therein.

ARTICLE 5

Customs Duties of a Fiscal Nature

No Customs duties of a fiscal nature shall be introduced in trade between the Parties. The provisions of Article 4 concerning the abolition of customs duties on imports shall also apply to customs duties of a fiscal nature.

ARTICLE 6

Customs Duties on Exports and Charges Having Equivalent Effect

1. No new customs duty on exports or charge having equivalent effect shall be introduced in trade between the Parties.
2. Customs duties on exports and any charges having equivalent effect shall be abolished between the Parties upon entry into force of this Agreement, with the exception of those listed in Annex II, which shall be abolished by Latvia at the latest by the end of 1998 .

 

ARTICLE 7

Quantitative Restrictions on Imports and Measures Having Equivalent Effect

1. No new quantitative restriction on imports or measure having equivalent effect shall be introduced in trade between the Parties from the date of entry into force of this Agreement.
2. Quantitative restrictions on imports shall be abolished between the Parties upon the date of entry into force of this Agreement.

ARTICLE 8

Quantitative Restrictions on Exports and Measures Having Equivalent Effect

1. No new quantitative restriction on exports or measure having equivalent effect shall be introduced in trade between the Parties as from the date of entry into force of this Agreement.
2. Quantitative restrictions on exports and any measures having equivalent effect shall be abolished upon the date of entry into force of this Agreement.

ARTICLE 9

Trade in Textile Products

Protocol A lays down the other arrangements applicable to the textile products.

CHAPTER II

AGRICULTURAL, PROCESSED AGRICULTURAL AND FISHERY PRODUCTS

ARTICLE 10

Scope

1. The provisions of this Chapter shall apply to agricultural, processed agricultural and fishery products originating in the Parties.
2. The term "agricultural products" means for the purpose of this Agreement the products falling within Chapters 1 to 24 of the Harmonized Commodity Description and Coding System and the products listed in Annex I.
3. In trade between the Parties from the date of entry into force of this Agreement no new customs duty on import or exports or charges having equivalent effect shall be introduced, nor shall those already applied be increased.

ARTICLE 11

Exchange of Concessions

1. The Parties to this Agreement declare their readiness to foster, in so far as their agricultural policies allow, the harmonious development of trade in agricultural products and to discuss this issue periodically in the Joint Committee.
2. In pursuance of this objective Protocol B providing for measures to facilitate trade in agricultural, processed agricultural and fishery products has been concluded between the Parties.

ARTICLE 12

Sanitary and Phytosanitary Measures

The parties shall not apply their regulations in sanitary and phytosanitary matters as an arbitrary or unjustifiable discrimination or a disguised restriction on trade between them.

CHAPTER III

RIGHT OF ESTABLISHMENT AND SUPPLY OF SERVICES

ARTICLE 13

1. The Parties shall seek to widen the scope of the Agreement to cover the right of establishment of firms of one Party in the territory of the other Party and the liberalization of the provision of services by one Party’s firms to consumers of services in the other.
2. The Parties will discuss this cooperation in the Joint Committee with the aim of developing and deepening their relations under this Article.

CHAPTER IV

COMMON PROVISIONS

ARTICLE 14

Internal Taxation

1. The Parties to this Agreement shall refrain from any measure or practice of an internal fiscal nature establishing, whether directly or indirectly, discrimination between the products originating in the Parties.
1. Exporters may not benefit from repayment of internal taxes in excess of the amount of direct or indirect taxes imposed on products exported to the territory of one of the Parties.

 

ARTICLE 15

Trade Relations Governed by Other Agreements

1. This Agreement shall not prevent the maintenance or establishment of customs unions, free trade areas or arrangements for frontier trade to the extent that these do not negatively affect the trade regime and in particular the provisions concerning rules of origin provided for by this Agreement.
2. Exchange of information between the Parties shall take place, on request, within the Joint Committee concerning agreements establishing such customs unions or free trade areas.

ARTICLE 16

Structural Adjustment

1. Exceptional measures of limited duration which derogate from the provisions of Article 4 may be taken by the Parties in the form of increased customs import duties.
2. These measures may only concern infant industries, or certain sectors undergoing restructuring or facing serious difficulties, particularly where these difficulties produce important social problems.
3. Customs duties on imports applicable in the Parties to products originating in the other Party introduced by these measures may not exceed 25 % ad valorem and shall maintain an element of preference for products originating in the other Party. The total value of imports of the products which are subject to these measures may not exceed 15 % of total imports of industrial products from the other Party as defined in Article 3, during the last year for which statistics are available.
4. These measures shall be applied for a period not exceeding three years and shall cease to apply at the latest by the end of the third year from the date of entry into force of the Agreement.
5. No such measure can be introduced in respect of a product if more than three years have elapsed since the elimination of all duties and quantitative restrictions or charges or measures having an equivalent effect concerning that product.
6. The Parties shall inform the Joint Committee of any exceptional measures they intend to take and, at the request of either Party, consultations shall be held in the Joint Committee on such measures and the sectors to which they apply before they are applied. When taking such measures the Party concerned shall provide the Joint Committee with a schedule for the elimination of the customs duties introduced under this Article. This schedule shall provide for a phasing out of these duties starting at the latest two years after their introduction at equal annual rates. The Joint Committee may decide on a different schedule.

ARTICLE 17

Dumping

If a Party finds that dumping, within the meaning of Article VI of GATT is taking place in trade relations governed by this Agreement, it may take appropriate measures against this practice in accordance with Article VI of the GATT and WTO Agreement on implementation of Article VI of the GATT 1994 and the rules established by agreements related to that Article, under the conditions and in accordance with the procedures laid down in Article 21.

ARTICLE 18

General Safeguards

Where any product is being imported in such increased quantities and under such conditions as to cause, or threaten to cause:

1. serious injury to domestic producers of like or directly competitive products in the territory of one of the Parties, or
2. serious disturbances in any sector of the economy or difficulties which could bring about serious deterioration in the economic situation of a region,

the Party concerned may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 21 of this Agreement, Article XIX of the GATT 1994 and the WTO Agreement on safeguards.

ARTICLE 19

Re-export and Serious Shortage

Where compliance with the provisions of Articles 4-8 leads to:

1. re-export towards a third country against which the exporting Party to this Agreement maintains, for the product concerned, quantitative export restrictions, export duties or measures or charges having equivalent effect; or
2. a serious shortage, or threat thereof, of a product essential to the exporting Party;

and where the situations referred to above give rise, or are likely to give rise to major difficulties for the exporting Party, that Party may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 21. The measures shall be non-discriminatory and be eliminated when conditions no longer justify their maintenance.

ARTICLE 20

State Monopolies

The Parties shall progressively adjust any state monopolies of a commercial character so as to ensure that by the end of 1998, no discrimination regarding the conditions under which goods are procured and marketed will exist between nationals of the Parties. The Joint Committee will be informed about the measures adopted to implement this objective.

ARTICLE 21

Procedure for the Application of Safeguard Measures

1. Before initiating the procedure for the application of safeguard measures set out in this Article, the Parties to this Agreement shall endeavor to solve any differences between themselves through direct consultations, and shall inform the other Party.
2. In the cases specified in Articles 16, 17, 18 and 19 a Party which is considering to resort to safeguard measures shall promptly notify the Joint Committee. The Party concerned shall provide the Joint Committee with all relevant information and give it the assistance required to examine the case. Consultations between the Parties shall take place without delay in the Joint Committee with a view to finding a commonly acceptable solution.
3. If, within one month of the matter being referred to the Joint Committee, the Party in question fails to put an end to the practice objected to or to the difficulties notified and in the absence of a decision by the Joint Committee in the matter, the concerned Party may adopt the safeguard measures it considers necessary to remedy the situation.
4. The safeguard measures taken shall be notified immediately to the Joint Committee. They shall be restricted, with regard to their extent and to their duration, to what is strictly necessary in order to rectify the situation giving rise to their application and shall not be in excess of the damage caused by the practice or the difficulty in question. Priority shall be given to such measures that will least disturb the functioning of this Agreement.
5. The safeguard measures taken shall be the subject of regular consultations within the Joint Committee with a view to their relaxation, or abolition when conditions no longer justify their maintenance.
6. Where exceptional circumstances requiring immediate action make prior examination impossible, the Party concerned may, in the case of Articles 16, 17, 18, 19, 25 and 26, apply forthwith the precautionary measures strictly necessary to remedy the situation. The measures shall be notified without delay to the Joint Committee and consultations between the Parties to this Agreement shall take place within the Joint Committee.

ARTICLE 22

Rules of Origin and Cooperation in Customs Administration

1. Protocol C lays down the rules of origin and methods of administrative cooperation.
2. The Parties shall take all appropriate measures, including arrangements regarding administrative cooperation, to ensure that the provisions of Articles 2, 4, 5, 6, 7 and 8 of this Agreement and Protocol C are effectively and harmoniously applied, taking into account the need to reduce as far as possible the formalities imposed on trade and the need to achieve mutually satisfactory solutions to any difficulties arising out of the operation of those provisions.

ARTICLE 23

General Exceptions

The Parties undertake to authorize, in freely convertible currency, in accordance to the provisions of Article VIII of the Articles of the Agreement of the International Monetary Fund, any payments on the current account of balance of payments to the extent that the transactions underlying the payments concern movements of goods.

ARTICLE 25

Rules of Competition Concerning Undertakings, Public Aid

2. Each Party shall ensure transparency in the area of public aid inter alia by reporting annually to the other Party on the total amount and the distribution of the aid given and by providing, upon request, information on aid schemes. Upon request by one Party, the other Party shall provide information on particular individual cases of public aid.
3. If Turkey or Latvia considers that a particular practice is incompatible with the terms of the first paragraph of this Article, and:

4. In the case of practices incompatible with paragraph 1.c) of this Article, such appropriate measures may, where the WTO/GATT 1994 applies thereto, only be adopted in conformity with the procedures and under the conditions laid down by the WTO/GATT 1994 and any other relevant instrument negotiated under its auspices which are applicable between the Parties.
5. Notwithstanding any provisions to the contrary adopted in conformity with paragraph 3 of this Article, the Parties shall exchange information taking into account the limitations imposed by the requirements of professional and business secrecy.

ARTICLE 26

Balance of Payments Difficulties

Where either Party is in serious balance of payment difficulties or under threat thereof, Turkey and Latvia as the case may be, may, in accordance with the conditions laid down within the framework of GATT and with Article VIII of the Articles of Agreement of International Monetary Fund, adopt restrictive measures including measures related to imports, which shall be of limited duration and may not go beyond what is necessary to remedy the balance of payment situation. Either Party, as the case may be, shall inform the other Party forthwith and present to the other Party, as soon as possible, of a time schedule of their removal.

ARTICLE 27

Intellectual, Industrial and Commercial Property

1. Pursuant to the provisions of this Article and of Annex IV, by 1.1.1999, the Parties shall ensure adequate and effective protection of intellectual, industrial and commercial property rights in accordance with the international standards, including effective means of enforcing such rights.
2. If problems in the area of intellectual, industrial and commercial property affecting trading conditions were to occur, urgent consultations within the Joint Committee will be undertaken, at the request of either party, with a view to reaching mutually satisfactory solutions.

ARTICLE 28

Public Procurement

1. The Parties consider the opening up of the award of public contracts on the basis of non-discrimination and reciprocity, to be a desirable objective.
2. As of the entry into force of this Agreement, both Parties shall grant each other’s companies access to contract award procedures a treatment no less favorable than that granted to companies of any other country according to the provisions of their internal legislation.

ARTICLE 29

Establishment of the Joint Committee

1. A Joint Committee is hereby established in which each Party shall be represented. The Joint Committee shall be responsible for the administration of this Agreement and shall ensure its proper implementation.
2. For the purpose of the proper implementation of this Agreement, the Parties shall exchange information and, at the request of any Party, shall hold consultations within the Joint Committee. The Joint Committee shall keep under review the possibility of further removal of the obstacles to trade between the Parties.
3. The Joint Committee may, in accordance with the provisions of paragraph 3 of Article 30, take decisions in the cases provided for in this Agreement. On other matters the Joint Committee may make recommendations.

ARTICLE 30

Procedures of the Joint Committee

1. For the proper implementation of this Agreement, the Joint Committee shall meet at an appropriate level whenever necessary upon request but at least once a year. Either Party may request a meeting to be held.
2. The Joint Committee shall act by common agreement.
3. If a representative in the Joint Committee of a Party to this Agreement has accepted a decision subject to the fulfillment of constitutional requirements, the decision shall enter into force, if no later date is contained therein, on the day the lifting of the reservation notified.
4. The Joint Committee shall adopt its rules of procedure which shall, inter alia, contain provisions for convening meetings and for the designation of the Chairman and his/her term of office.
5. The Joint Committee may decide to set up such sub-committees and working parties as it considers necessary to assist it in accomplishing its tasks.

ARTICLE 31

Security Exceptions

Nothing in this Agreement shall prevent a Party from taking any measures which it considers necessary:

ARTICLE 32

Fulfillment of Obligations

1. The Parties shall take all necessary measures to ensure the achievement of the objectives of this Agreement and the fulfillment of their obligations under this Agreement.
2. If either Party considers that the other has failed to fulfill an obligation under this Agreement, the Party concerned may take the appropriate measures under the conditions and in accordance with the procedures laid down in Article 21.

ARTICLE 33

Evolutionary Clause

1. Where either Party considers that it would be useful in the interest of the economies of the Parties to develop the relations established by this Agreement by extending them to fields not covered thereby, it shall submit a reasoned request to the other Party. The Parties may instruct the Joint Committee to examine this request and, where appropriate, to make recommendations to them, particularly with a view to opening negotiations.
2. Agreements resulting from the procedure referred to in paragraph 1 will be subject to ratification or approval by the Parties to this Agreement in accordance with their internal legal procedures.

ARTICLE 34

Amendments

Amendments to this Agreement other than those referred to in paragraph 3 of Article 29, which are approved by the Joint Committee shall be submitted to the Parties for ratification or acceptance in accordance with their internal legal procedures and shall enter into force in accordance with the provisions of Article 37.

ARTICLE 35

Protocols and Annexes

Protocols and Annexes to this Agreement are an integral part of this Agreement. The Joint Committee may decide to amend the Protocols and Annexes in accordance with the provision of paragraph 3 of the Article 30.

 

ARTICLE 36

Expiration

Each party may denounce this Agreement by means of a written notification to the other Party. This Agreement shall cease to apply six months after the date of receipt of such notification.

ARTICLE 37

Entry into Force

This Agreement shall enter into force on the first day of the second month, following the date on which the Parties have notified each other through diplomatic channels, that their internal legal requirements for the entry into force of this Agreement have been fulfilled.

IN WITNESS WHEREOF the undersigned plenipotentiaries, being duly authorized thereto, have signed this Agreement.

 

DONE at Ankara, this 16 th day of June, 1998, in two originals each in the English language both texts being equally authentic.

 

 

ANNEX I

List of products referred to in Article 3

HEADING	BRIEF PRODUCT DESCRIPTION
2905 43 00	- - Mannitol
2905 44	- - D-glucitol (sorbitol)
3302	Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages:
3302 10 29	- - - - - Other
3501 10	- Casein:
3501 10 10	- - For the manufacture of regenerated textile fibres
3501 10 50	- - For industrial uses Other than the manufacture of foodstuffs or fodder
3501 10 90	- - Other
3501 90	- Other:
3501 90 90	- - Other
3502	Albumins (including concentrates of two or more whey proteins, containing by weight more than 80% whey proteins, calculated on the dry matter), albuminates and Other albumin derivatives:
	- Egg albumin:
3502 11	- - Dried:
3502 11 10	- - - Unfit, or to be rendered unfit, for human consumption
3502 11 90	- - - Other
3502 19	- - Other:
3502 19 10	- - - Unfit, or to be rendered unfit, for human consumption
3502 19 90	- - - Other
3502 20	- Milk albumin, including concentrates of two or more whey proteins:
3502 20 10	- - Unfit, or to be rendered unfit, for human consumption
	- - Other:
3502 20 91	- - - Dried (for example, in sheets, scales, flakes, powder)
3502 20 99	- - - Other
	- Other:
	- - Albumins, Other than egg albumin and milk albumin (lactalbumin):
3502 90 20	- - - Unfit, or to be rendered unfit, for human consumption
3502 90 70	- - - Other
3502 90 90	- - Albuminates and Other albumin derivatives
3505 10	- Dextrins and Other modified starches
3505 10 10	- - Dextrins
3505 10 90	- - Other
3505 20	- Glues
3809	Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and Other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included:
3809 10	- With a basis of amylaceous substances
	- Other:
3809 91 00	- - Of a kind used in the textile or like industries (excluding 3809 91 00 90 11 19)
3809 92 00	- - Of a kind used in the paper or like industries (excluding 3809 92 00 90 00)
3809 93 00	- - Of a kind used in the leather or like industries (excluding 3809 93 00 90 00)
3824 60	- Sorbitol Other than that of subheading 2905 44
4501	Natural cork, raw or simply prepared; waste cork; crushed, granulated or ground cork:
4501 10 00	- Natural cork, raw or simply prepared
4501 90 00	- Other
5201 00	Cotton, not carded or combed
5301	Flax, raw or processed but not spun; flax tow and waste (including yarn waste and gartnetted stock)
5302	True hemp (Cannabis sativa L.), raw or processed but not spun; tow and waste of true hemp (including yarn waste and gartnetted stock)

 

ANNEX II

The customs duties for the products listed below shall be:

- reduced to the 70% of the basic duty with the entry into force of the Agreement,

- reduced to the 40% of the basic duty on 1.1.1999,

- eliminated on 1.1.2000.

Category	CN Taric code	Description
1	5204 11 00 5204 19 00	- - Containing 85 % or more by weight of cotton - - Other
	5205	Cotton yarn (other than sewing thread), containing 85 % or more by weight of cotton, not put up for retail sale
	5206	Cotton yarn (other than sewing thread), containing less than 85 % by weight of cotton, not put up for retail sale
	5604 90 00 *50
2	5208 5209  5210  5211 5212 5811 00 00 * 91 * 92 6308 00 00 * 11 * 19	Woven fabrics of cotton, containing 85 % or more by weight of cotton, weighing not more than 200 g/m2 Woven fabrics of cotton, containing less than 85 % by weight of cotton, mixed mainly or solely with man-made fibres, weighing not more than 200 g/m2 Woven fabrics of cotton, containing less than 85 % by weight of cotton, mixed mainly or solely with man-made fibres, weighing not more than 200 g/m2 Other woven fabrics of cotton
4	6105 10 00 6105 20 10 6105 20 90 6105 90 10	- Of cotton - - Of synthetic fibres - - Of artificial fibres - - Of wool or fine animal hair
	6109 10 00 6109 90 10 6109 90 30	- Of cotton - - Of wool or fine animal hair - - Of man-made fibres
	6110 20 10 6110 30 10	- - Lightweight fine knit roll, polo or turtle neck jumpers and pullovers - - Lightweight fine knit roll, polo or turtle neck jumpers and pullovers
5	6101 10 90 6101 20 90 6101 30 90	- - Anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles - - Anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles - - Anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles
	6102 10 90 6102 20 90 6102 30 90	- - Anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles - - Anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles - - Anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles
(5 conti-nued)	6110 10 10 6110 10 31 6110 10 35 6110 10 38 6110 10 91 6110 10 95 6110 10 98 6110 20 91 6110 20 99 6110 30 91 6110 30 99	- - Jerseys and pullovers, containing at least 50 % by weight of wool and weighing 600 g or more per article - - - - Of wool - - - - - Of Kashmir goats - - - - - Other - - - - Of wool - - - - - Of Kashmir goats - - - - - Other - - - Men's or boys' - - - Women's or girls' - - - Men's or boys' - - - Women's or girls'
7	6106 10 00 6106 20 00 6106 90 10	- Of cotton - Of man-made fibres - - Of wool or fine animal hair
	6206 20 00 6206 30 00 6206 40 00	- Of wool or fine animal hair - Of cotton - Of man-made fibres
8	6205 10 00 6205 20 00 6205 30 00	- Of wool or fine animal hair - Of cotton - Of man-made fibres
9	5802 11 00 5802 19 00 6302 60 00 * 90	- - Unbleached - - Other
15	6202 11 00 6202 12 10 * 90 6202 12 90 * 90 6202 13 10 * 90 6202 13 90 * 90 6204 31 00 6204 32 90 6204 33 90 6204 39 19 6210 30 00	- - Of wool or fine animal hair         - - Of wool or fine animal hair - - - Other - - - Other - - - - Other - Other garments, of the type described in subheadings 6202 11 to 6202 19
12	6115 12 00 6115 19 10 6115 19 90 6115 20 11 6115 20 90	- - Of synthetic fibres, measuring per single yarn 67 decitex or more - - - Of wool or fine animal hair - - - Other - - - Knee-length stockings - - Of other textile materials
	6115 91 00 6115 92 00 6115 93 10 6115 93 30 6115 93 99 6115 99 00	- - Of wool or fine animal hair - - Of cotton - - - Stockings for varicose veins - - - Knee-length stockings (other than stockings for varicose veins) - - - - Other - - Of other textile materials
26	6104 41 00 6104 42 00 6104 43 00 6104 44 00 6204 41 00 6204 42 00 6204 43 00 6204 44 00	- - Of wool or fine animal hair - - Of cotton - - Of synthetic fibres - - Of artificial fibres - - Of wool or fine animal hair - - Of cotton - - Of synthetic fibres - - Of artificial fibres
27	6104 51 00 6104 52 00 6104 53 00 6104 59 00 6204 51 00 6204 52 00 6204 53 00 6204 59 10	- - Of wool or fine animal hair - - Of cotton - - Of synthetic fibres - - Of other textile materials - - Of wool or fine animal hair - - Of cotton - - Of synthetic fibres - - - Of artificial fibres
31	6212 10 00	- Brassié res

 

ANNEX III

List of products referred to in Article 6

		Duty (%)
CN code	Description	Since 01.07. 1997	1998	1999
Chapter 44 4403	WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared:
4403 20 4403 20 100 4403 20 101	- Other, coniferous: - - Spruce of the kind “Picea abies Karst.” or silver fir (Abies alba Mill.) --- round timber with the length over 2 metres and the diameter 14 to 24 centimetres	Ls 3.0	Ls 3.0	0
4403 20 102	--- round timber with the length over 2 metres and the diameter 26 centimetres or more	Ls 4.0	Ls 4.0	0
4403 20 300 4403 20 301	--Pine of the kind “Pinus sylvestris L.” --- round timber with the length over 2 metres and the diameter 14 to 24 centimetres	Ls 3.0	Ls 3.0	0
4403 20 302	--- round timber with the length over 2 metres and the diameter 26 centimetres or more	Ls 4.0	Ls 4.0	0
4403 20 900 4403 20 901	--Other: --- round timber with the length over 2 metres and the diameter 14 to 24 centimetres	Ls 3.0	Ls 3.0	0
4403 20 902	--- round timber with the length over 2 metres and the diameter 26 centimetres or more	Ls 4.0	Ls 4.0	0
4403 91 000 4403 91 001	- - Of oak (Quercus spp.) --- oak-tree round timber with the length over 1 metre and the diameter over 14 centimetres	Ls 25.0	Ls 25.0	0
4403 92 000 4403 92 001	- - Of beech (Fagus spp.) --- beech tree round timber with the length over 1 metre and the diameter over 14 centimetres	Ls 30.0	Ls 30.0	0
4403 99 4403 99 500 4403 99 501	--Other: - - - Of birch --- round timber with the length over 1.6 metres and the diameter 16 to 24 centimetres (veneer blocks, match blocks and A-rate sawn logs)	Ls 8.0	Ls 8.0	0
4403 99 502	--- round timber with the length over 1.6 metres and the diameter 26 centimetres or more (veneer blocks, match blocks and A-rate sawn logs)	Ls 10.0	Ls 10.0	0
4403 99 503	--- round timber with the length over 1.6 metres and the diameter 16 to 24 centimetres (veneer blocks, match blocks and A-rate sawn logs)	Ls 2.0	Ls 2.0	0
4403 99 504	--- round timber with the length over 1.6 metres and the diameter 26 centimetres or more (except veneer blocks, match blocks and A-rate sawn logs)	Ls 3.0	Ls 3.0	0
4403 99 990 4403 99 991 4403 99 992	--- Other: ---- of other deciduous trees (soft): ----- round timber with the length over 1.6 metres and the diameter 16 to 24 centimetres (veneer blocks, match blocks and A-rate sawn logs)	Ls 8.0	Ls 8.0	0
4403 99 993	----- round timber with the length over 1.6 metres and the diameter 26 centimetres or more (veneer blocks, match blocks and A-rate sawn logs)	Ls 10.0	Ls 10.0	0
4403 99 994	----- round timber with the length over 1.6 metres and the diameter 16 to 24 centimetres (except veneer blocks, match blocks and A-rate sawn logs)	Ls 2.0	Ls 2.0	0
4403 99 995	----- round timber with the length over 1.6 metres and the diameter 26 centimetres or more (except veneer blocks, match blocks and A-rate sawn logs)	Ls 3.0	Ls 3.0	0
4403 99 998	---- ash-tree, elm, hornbeam, maple and other Latvia origin hard deciduous tree round timber with the length over 1 metre and the diameter 14 centimetres	Ls 25.0	Ls 25.0	0
Chapter 72 7204	IRON AND STEEL Ferrous waste and scrap; remelting scrap ingots of iron or steel:	100	100	0

ANNEX IV

referred to in Article 27

1. Paragraph 1 of Article 27 concerns the following multilateral conventions:

• Bern Convention for the Protection of Literary and Artistic Works (Paris Act, 1971);

• International Convention for the Protection of Performers, Producers of Phonograms and Broadcasting Organisations (Rome, 1961);

• Nice Agreement concerning the International Classification of Goods and Services for the purposes of the Registration of Marks (Geneva, 1977 and amended in 1979);

• Protocol relating to the Madrid Agreement concerning the International Registration of Marks (Madrid, 1989);

• Budapest Treaty of the International Recognition of the Deposit of Micro-organisms for the Purposes of Patent Procedures (1977, modified in 1980);

• International Convention for the Protection of New Varieties of Plants (UPOV) (Geneva Act, 1991).

The Joint Committee may decide that paragraph 1 of Article 27 shall apply to other multilateral conventions.

2. The Parties confirm the importance they attach to the obligations arising from the following multilateral conventions:

• Madrid Agreement concerning the International Registration of Marks (Stockholm Act, 1967 and amended in 1979);

• Paris Convention for the Protection of Industrial Property (Stockholm Act 1967 and amended in 1979);

• Patent Co-operation Treaty (Washington 1970, amended in 1979 and modified in 1984).

 

PROTOCOL A

referred to in Article 9

 

Trade in textile products between Turkey and Latvia shall continue to be regulated by the Memorandum of Understanding between the Government of Turkey and the Government of Latvia concerning trade in textiles and clothing, accepted by Note Verbale of the Ministry of Foreign Affairs of the Republic of Latvia dated 11 January 1996 and numbered 32/n-52-43 addressed to the Embassy of Turkey in Lithuania.

This MOU will become null and void when the European Community abolishes the arrangements referred in the above mentioned Protocol.

 

 

PROTOCOL B

(referred to in Article 11)

EXCHANGE OF AGRICULTURAL CONCESSIONS BETWEEN LATVIA AND TURKEY

 

1. The Products originating in Turkey listed in Annex A to this Protocol shall be imported into Latvia according to the conditions established in that Annex.

2.  

3. The Products originating in Latvia listed in Annex B to this Protocol shall be imported into Turkey according to the conditions established in that Annex.

Annex A

Imports into Latvia of the following products originating in Turkey shall be subject to the concessions set out below.

CN Code	Description of products	Quota, t	Duty rate, (%)
1	2	3	4
0406.90.29	- - - Kashkaval
0406.90.31	- - - - Of sheep's milk or buffalo milk in containers containing brine, or in sheep or goatskin bottles
0406.90.33	- - - - Other	100	0
0406.90.50	- - - - Cheese of sheep's milk or buffalo milk in containers containing brine, or in sheep or goatskin bottles
0603.10.51	- - - Roses
0603.10.53	- - - Carnations	15	0
0603.10.61	- - - Gladioli
0603.10.65	- - - Chrysanthemums
0702.00.00	Tomatoes, fresh or chilled	150	0
0709.60.10	- - Sweet peppers	50	0
1517	Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this chapter, other than edible fats or oils or their fractions of heading No1516	100	0
1604.14	- - Tunas, skipjack and bonito (Sarda spp.)	unlimited	0
1604.20.70	- - - Of tunas, skipjack or other fish of the genus Euthynnus
1704.10	- Chewing gum, whether or not sugar-coated	20	7.5
1704.90	- Other	200	7.5
1806.31	- - Filled
1806.32	- - Not filled	100	15
1806.90	- Other
1905	Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products	50	17.5
2005.70	- Olives	100	0
2007 (ex. 2007.91,99; excl. 2007.99.31,33,35, 55,91)	Jams, fruit jellies, marmalades, fruit or nut puré e and fruit or nut pastes, being cooked preparations, whether or not containing added sugar or other sweetening matter	unlimited	0
2008 (excl. 2008.40,60,80)	Fruit, nuts and other edible parts of plants, otherwise prepared or preserved, whether or not containing added sugar or other sweetening matter or spirit, not elsewhere specified or included	unlimited	0
2103.20	- Tomato ketchup and other tomato sauces	150	0
2105	Ice cream and other edible ice, whether or not containing cocoa	100	7.5
2203	Beer made from malt	1000 hl	0
2401	Unmanufactured tobacco; tobacco refuse	unlimited	0

Annex B

Imports into Turkey of the following products originating in Latvia shall be subject to the concessions set out below.

CN Code	Description of products	Quota, t	Duty rate, (%)
1	2	3	4
0402	Milk and cream, concentrated or containing added sugar or other sweetening matter	100	0 *
0405 (excl. 0405.20,10,30)	Butter and other fats and oils derived from milk: dairy spreads	100	0
0405.20,10,30			0+EA ***
0406.90 (excl. 0406.90,29,31,33, 50)	- Other cheese	100	0
0709.51	- - Mushrooms	50	6.75
1602 (excl. 1602.41,42,49)	Other prepared or preserved meat, meat offal or blood	100	35
1603	Extracts and juices of meat, fish or crustaceans, molluscs or other aquatic invertebrates	unlimited	0 **
1604	Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs	unlimited	0 **
1704.90	- Other	200	0+EA ***
1806	Chocolate and other food preparations containing cocoa	100	0+EA ***
1905	Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products	50	0+EA ***
2001.9050	- - Mushrooms	25	23
2003.10	- Mushrooms
2103.20	- Tomato ketchup and other tomato sauces	150	0
2103.90.90	- - Other	100	0
2105	Ice cream and other edible ice, whether or not containing cocoa	100	0+EA ***
2106.90 (excl. 2106.90,30,51,55, 59)	- Other	100	0+EA ***
2106.90.92	- - - Containing no milk fats, sucrose, isoglucose, glucose or starch or containing less than 1,5 % milk fat, 5 % sucrose or isoglucose, 5% glucose or starch		0
2203	Beer made from malt	1000 hl	0
2204.10	- Sparkling wine	750 hl	35
2208 (excl. 2208.90,91,10, 2208.90.99.10)	Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages	unlimited	0

* These quotas are foreseen for imports under the inward processing scheme.

** Agricultural component, applied to the EU, will be the same for Latvia on the products contained in this Annex. The alignment of agricultural component for 1905.30, 2105.00.10.10, 2105.00.10.90, 2105.00.91.10, 2105.00.91.90 will follow the same timetable that Turkey applies for the EU and it will be completed as of 1.1.1999.

*** The timetable applicable to EFTA member states are granted for Latvia, accordingly the protection rate shall be abolished gradually (as of 1.1.1999 “0” duty).

PROTOCOL C

concerning the definition of the concept of "originating products" and methods of administrative cooperation

TABLE OF CONTENTS

TITLE I GENERAL PROVISIONS

- Article 1 Definitions

TITLE II DEFINITION OF THE CONCEPT OF "ORIGINATING PRODUCTS"

- Article 2 General requirements
- Article 3 Bilateral cumulation of origin
- Article 4 Diagonal cumulation of origin

- Article 5 Wholly obtained products
- Article 6 Sufficiently worked or processed products
- Article 7 Insufficient working or processing operations
- Article 8 Unit of qualification
- Article 9 Accessories, spare parts and tools
- Article 10 Sets
- Article 11 Neutral elements

TITLE III TERRITORIAL REQUIREMENTS

- Article 12 Principle of territoriality
- Article 13 Direct transport
- Article 14 Exhibitions

TITLE IV DRAWBACK OR EXEMPTION

- Article 15 Prohibition of drawback of, or exemption from, customs duties

TITLE V PROOF OF ORIGIN

- Article 16 General requirements
- Article 17 Procedure for the issue of a movement certificate EUR.1
- Article 18 Movement certificates EUR.1 issued retrospectively
- Article 19 Issue of a duplicate movement certificate EUR.1
- Article 20 Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

- Article 21 Conditions for making out an invoice declaration
- Article 22 Approved exporter
Article 23 Validity of proof of origin
- Article 24 Submission of proof of origin
- Article 25 Importation by installments
- Article 26 Exemptions from proof of origin
- Article 27 Supporting documents
- Article 28 Preservation of proof of origin and supporting documents
- Article 29 Discrepancies and formal errors
- Article 30 Amounts expressed in ECU

TITLE VI ARRANGEMENTS FOR ADMINISTRATIVE COOPERATION

- Article 31 Mutual assistance
- Article 32 Verification of proofs of origin
- Article 33 Dispute settlement
- Article 34 Penalties
- Article 35 Free zones

TITLE VII FINAL PROVISIONS

- Article 36 Sub Committee on customs and origin matters

- Article 37 Annexes
- Article 38 Amendments to the Protocol

 

TITLE I

GENERAL PROVISIONS

Article 1

Definitions

For the purposes of this Protocol:

(a) "manufacture" means any kind of working or processing including assembly or specific operations;

(b) "material" means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c) "product" means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d) "goods" means both materials and products;

(e) "customs value" means the value as determined in accordance with the 1994 Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade (WTO Agreement on customs valuation);

(f) "ex-works price" means the price paid for the product ex works to the manufacturer in Latvia or Turkey in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g) "value of materials" means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in Latvia or Turkey;

(h) "value of originating materials" means the value of such materials as defined in subparagraph (g) applied mutatis mutandis ;

(i) "added value" shall be taken to be the ex-works price minus the customs value of each of the products incorporated which did not originate in the country in which those products were obtained;

(j) "chapters" and "headings" mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the Harmonized

Commodity Description and Coding System, referred to in this Protocol as "the Harmonized System" or "HS";

(k) "classified" refers to the classification of a product or material under a particular heading;

(l) "consignment" means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m) "territories" includes territorial waters.

 

TITLE II

DEFINITION OF THE CONCEPT OF "ORIGINATING PRODUCTS"

Article 2

General requirements

1. For the purpose of implementing this Agreement, the following products shall be considered as originating in Latvia:

(a) products wholly obtained in Latvia within the meaning of Article 5 of this Protocol;

(b) products obtained in Latvia incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Latvia within the meaning of Article 6 of this Protocol.

2. For the purpose of implementing this Agreement, the following products shall be considered as originating in Turkey:

(a) products wholly obtained in Turkey within the meaning of Article 5 of this Protocol;

(b) products obtained in Turkey incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Turkey within the meaning of Article 6 of this Protocol.

Article 3

Bilateral cumulation of origin

1. Materials originating in Latvia shall be considered as materials originating in Turkey when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 7(1) of this Protocol.

2. Materials originating in Turkey shall be considered as materials originating in Latvia when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 7(1) of this Protocol.

Article 4

Diagonal cumulation of origin

1. Subject to the provisions of paragraphs 2 and 3, materials originating in the European Communities, Poland, Hungary, the Czech Republic, the Slovak Republic, Bulgaria, Romania, Estonia, Lithuania, Slovenia, Iceland, Norway or Switzerland within the meaning of the Agreements between Latvia and Turkey and these countries shall be considered as originating in Latvia or Turkey when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing.
2. Products which have acquired originating status by virtue of paragraph 1 shall only continue to be considered as products originating in Latvia or Turkey when the value added there exceeds the value of the materials used originating in any one of the other countries referred to in paragraph 1. If this is not so, the products concerned shall be considered as originating in the country referred to in paragraph 1 which accounts for the highest value of originating materials used. In the allocation of origin, no account shall be taken of materials originating in the other countries referred to in paragraph 1 which have undergone sufficient working or processing in Latvia or Turkey.
3. The cumulation provided for in this Article may only be applied where the materials used have acquired the status of originating products by an application of rules of origin identical to the rules in this Protocol. Latvia and Turkey shall provide each other, with details of agreements and their corresponding rules of origin which have been concluded with the other countries referred to in paragraph 1.

Article 5

Wholly obtained products

I. The following shall be considered as wholly obtained in Latvia or Turkey:

(a) mineral products extracted from their soil or from their seabed;

(b) vegetable products harvested there;

(c) live animals born and raised there;

(d) products from live animals raised there;

(e) products obtained by hunting or fishing conducted there;

(f) products of sea fishing and other products taken from the sea outside the territorial waters of Latvia or Turkey by their vessels;

(g) products made aboard their factory ships exclusively from products referred to in subparagraph (f);

(h) used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste;

(i) waste and scrap resulting from manufacturing operations conducted there;

(j) products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(k) goods produced there exclusively from the products specified in subparagraphs (a) to (j).

2. The terms "their vessels" and "their factory ships" in paragraph 1(f) and (g) shall apply only to vessels and factory ships:

(a) which are registered or recorded in Latvia or Turkey;

(b) which sail under the flag of Latvia or Turkey;

(c) which are owned to an extent of at least 50 per cent by nationals of Latvia or of Turkey, or by a company with its head office in one of the Parties, of which the manager or managers, Chairman of the Board of Directors or the Supervisory Board, and the majority of the members of such boards are nationals of Latvia or Turkey and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to Latvia or Turkey or to public bodies or nationals of Latvia or Turkey;

(d) of which the master and officers are nationals of Latvia or of Turkey, and

(e) of which at least 75 per cent of the crew are nationals of Latvia or of Turkey.

Article 6

Sufficiently worked or processed products

1. For the purposes of Article 2, products which are not wholly obtained are considered to be sufficiently worked or processed when the conditions set out in the list in Annex II of this Protocol are fulfilled.

The conditions referred to above indicate, for all products covered by this Agreement, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. Accordingly, it follows that if a product, which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

2. Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in the list, should not be used in the manufacture of a product may nevertheless be used, provided that:

(a) their total value does not exceed 10 per cent of the ex-works price of the product;

(b) any of the percentages given in the list for the maximum value of non-originating materials are not exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonized System.

3. Paragraphs 1 and 2 shall apply except as provided in Article 7.

Article 7

Insufficient working or processing operations

1. Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 6 are satisfied:

1. operations to ensure the preservation of products in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts, and like operations);
2. simple operations consisting of removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, painting, cutting up;
3. (i) changes of packaging and breaking up and assembly of packages;

4. (ii) simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards etc., and all other simple packaging operations;

5. affixing marks, labels and other like distinguishing signs on products or their packaging;
6. simple mixing of products, whether or not of different kinds, where one or more components of the mixtures do not meet the conditions laid down in this Protocol to enable them to be considered as originating in Latvia or Turkey;
7. simple assembly of parts to constitute a complete product;
8. a combination of two or more operations specified in subparagraphs (a) to (f);
9. slaughter of animals.

2. All the operations carried out in either Latvia or Turkey on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 8

Unit of qualification

1. The unit of qualification for the application of the provisions of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonized System.

Accordingly, it follows that:

1. when a product composed of a group or assembly of articles is classified under the terms of the Harmonized System in a single heading, the whole constitutes the unit of qualification;
2. when a consignment consists of a number of identical products classified under the same heading of the Harmonized System, each product must be taken individually when applying the provisions of this Protocol.

2. Where, under General Rule 5 of the Harmonized System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 9

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 10

Sets

Sets, as defined in general rule 3 of the Harmonized System, shall be regarded as originating when all component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 per cent of the ex-works price of the set.

Article 11

Neutral elements

In order to determine whether a product originates, it shall not be necessary to determine the origin of the following which might be used in its manufacture :

1. energy and fuel;
2. plant and equipment;
3. machines and tools;
4. goods which do not enter and which are not intended to enter into the final composition of the product.

TITLE III

TERRITORIAL REQUIREMENTS

Article 12

Principle of territoriality

1. The conditions set out in Title II relative to the acquisition of originating status must be fulfilled without interruption in Latvia or Turkey, except as provided for in Article 4.

2. If originating goods exported from Latvia or Turkey to another country are returned, except in so far as provided for in Article 4 they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

1. the goods returned are the same goods as those exported; and
2. they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

Article 13

Direct transport

1. The preferential treatment provided for under the Agreement applies only to products, satisfying the requirements of this Protocol, which are transported directly between Latvia and Turkey or through the territories of the other countries referred to in Article 4. However, products constituting one single consignment may be transported through other territories with, should the occasion arise, trans-shipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition.

Originating products may be transported by pipeline across territory other than that of Latvia or Turkey.

2. Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing country by the production of:

(a) a single transport document covering the passage from the exporting country through the country of transit; or

(b) a certificate issued by the customs authorities of the country of transit:

(c) failing these, any substantiating documents.

Article 14

Exhibitions

1. Originating products, sent for exhibition in a country other than those referred to in Article 4 and sold after the exhibition for importation in Latvia or Turkey shall benefit on importation from the provisions of the Agreement provided it is shown to the satisfaction of the customs authorities that :

1. an exporter has consigned these products from Latvia or Turkey to the country in which the exhibition is held and has exhibited them there;
2. the products have been sold or otherwise disposed of by that exporter to a person in Latvia or Turkey;
3. the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and
4. the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2. A proof of origin must be issued or made out in accordance with the provisions of Title V and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required.

3. Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organized for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.

TITLE IV

DRAWBACK OR EXEMPTION

Article 15

Prohibition of drawback of, or exemption from, customs duties

1. Non-originating materials used in the manufacture of products originating in Latvia, in Turkey or in one of the other countries referred to in Article 4 for which a proof of origin is issued or made out in accordance with the provisions of Title V shall not be subject in Latvia or Turkey to drawback of, or exemption from, customs duties of whatever kind.
2. The prohibition in paragraph 1 shall apply to any arrangement for refund, remission or non-payment, partial or complete, of customs duties or charges having an equivalent effect, applicable in Latvia or Turkey to materials used in the manufacture, where such refund, remission or non-payment applies, expressly or in effect, when products obtained from the said materials are exported and not when they are retained for home use there.
3. The exporter of products covered by a proof of origin shall be prepared to submit at any time, upon request from the customs authorities, all appropriate documents proving that no drawback has been obtained in respect of the non-originating materials used in the manufacture of the products concerned and that all customs duties or charges having equivalent effect applicable to such materials have actually been paid.
4. The provisions of paragraphs 1 to 3 shall also apply in respect of packaging within the meaning of Article 8 (2), accessories, spare parts and tools within the meaning of Article 9 and products in a set within the meaning of Article 10 when such items are non-originating.
5. The provisions of paragraphs 1 to 4 shall apply only in respect of materials which are of the kind to which the Agreement applies. Furthermore, they shall not preclude the application of an export refund system for agricultural products, applicable upon export in accordance with the provisions of the Agreement.

TITLE V

PROOF OF ORIGIN

Article 16

General requirements

1. Products originating in Latvia shall, on importation into Turkey and products originating in Turkey shall, on importation into Latvia benefit from this Agreement upon submission of either :

1. a movement certificate EUR.1, a specimen of which appears in Annex III; or
2. in the cases specified in Article 21(1), a declaration, the text of which appears in Annex IV, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified (hereinafter referred to as the "invoice declaration").

2. Notwithstanding paragraph 1, originating products within the meaning of this Protocol shall, in the cases specified in Article 26, benefit from this Agreement without it being necessary to submit any of the documents referred to above.

Article 17

Procedure for the issue of a movement certificate EUR.1

1. A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by his authorized representative.
2. For this purpose, the exporter or his authorized representative shall fill out both the movement certificate EUR.1 and the application form, specimens of which appear in Annex III. These forms shall be completed in the Latvian, Turkish or English languages and in accordance with the provisions of the domestic law of the exporting country. If they are handwritten, they shall be completed in ink in printed characters. The description of the products must be given in the box reserved for this purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line must be drawn below the last line of the description, the empty space being crossed through.
3. The exporter applying for the issue of a movement certificate EUR.1 shall be prepared to submit at any time, at the request of the customs authorities of the exporting country where the movement certificate EUR.1 is issued, all appropriate documents proving the originating status of the products concerned as well as the fulfillment of the other requirements of this Protocol.
4. A movement certificate EUR.1 shall be issued by the customs authorities of Latvia or Turkey if the products concerned can be considered as products originating in Latvia, Turkey or in one of the other countries referred to in Article 4 and fulfill the other requirements of this Protocol.
5. The issuing customs authorities shall take any steps necessary to verify the originating status of the products and the fulfillment of the other requirements of this Protocol. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. The issuing customs authorities shall also ensure that the forms referred to in paragraph 2 are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions.
6. The date of issue of the movement certificate EUR.1 shall be indicated in Box 11 of the certificate.
7. A movement certificate EUR.1 shall be issued by the customs authorities and made available to the exporter as soon as actual exportation has been effected or ensured.

Article 18

Movement certificates EUR.1 issued retrospectively

1. Notwithstanding Article 17(7), a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if:

1. it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or
2. it is demonstrated to the satisfaction of the customs authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons.

2. For the implementation of paragraph 1, the exporter must indicate in his application the place and date of exportation of the products to which the movement certificate EUR.1 relates, and state the reasons for his request.

3. The customs authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application agrees with that in the corresponding file.

4. Movement certificates EUR.1 issued retrospectively must be endorsed with one of the following phrases:

"IZDOTS P?C PRE?U EKSPORTA"

"SONRADAN VER?LM??T?R"

"ISSUED RETROSPECTIVELY"

5. The endorsement referred to in paragraph 4 shall be inserted in the "Remarks" box of the movement certificate EUR.1.

Article 19

Issue of a duplicate movement certificate EUR.1

1. In the event of theft, loss or destruction of a movement certificate EUR.1, the exporter may apply to the customs authorities which issued it for a duplicate made out on the basis of the export documents in their possession.
2. The duplicate issued in this way must be endorsed with one of the following words:

3. "DUBLIK?TS"

   "IKINCI NÜSHADIR"

   "DUPLICATE"

4. The endorsement referred to in paragraph 2 shall be inserted in the "Remarks" box of the duplicate movement certificate EUR.1.
5. The duplicate, which must bear the date of issue of the original movement certificate EUR.1, shall take effect as from that date.

 

Article 20

Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

When originating products are placed under the control of a customs office in Latvia or Turkey, it shall be possible to replace the original proof of origin by one or more movement certificates EUR.1 for the purpose of sending all or some of these products elsewhere within Latvia or Turkey. The replacement movement certificate(s) EUR.1 shall be issued by the customs office under whose control the products are placed.

 

Article 21

Conditions for making out an invoice declaration

1. An invoice declaration as referred to in Article 16(1)(b) may be made out:

1. by an approved exporter within the meaning of Article 22, or
2. by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed ECU 6 000.

2. An invoice declaration may be made out if the products concerned can be considered as products originating in Latvia, Turkey or in one of the other countries referred to in Article 4 and fulfill the other requirements of this Protocol.

3. The exporter making out an invoice declaration shall be prepared to submit at any time, at the request of the customs authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as the fulfillment of the other requirements of this Protocol.

4. An invoice declaration shall be made out by the exporter by typing, stamping or printing on the invoice, the delivery note or another commercial document, the declaration, the text of which appears in Annex IV, using one of the linguistic versions set out in that Annex and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink in printed characters.

5. Invoice declarations shall bear the original signature of the exporter in manuscript. However, an approved exporter within the meaning of Article 22 shall not be required to sign such declarations provided that he gives the customs authorities of the exporting country a written undertaking that he accepts full responsibility for any invoice declaration which identifies him as if it had been signed in manuscript by him.

6. An invoice declaration may be made out by the exporter when the products to which it relates are exported, or after exportation on condition that it is presented in the importing country no longer than two years after the importation of the products to which it relates.

Article 22

Approved exporter

1. The customs authorities of the exporting country may authorize any exporter who makes frequent shipments of products under this Agreement to make out invoice declarations irrespective of the value of the products concerned. An exporter seeking such authorization must offer to the satisfaction of the customs authorities all guarantees necessary to verify the originating status of the products as well as the fulfillment of the other requirements of this Protocol.
2. The customs authorities may grant the status of approved exporter subject to any conditions which they consider appropriate.
3. The customs authorities shall grant to the approved exporter a customs authorization number which shall appear on the invoice declaration.
4. The customs authorities shall monitor the use of the authorization by the approved exporter.
5. The customs authorities may withdraw the authorization at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, does not fulfill the conditions referred to in paragraph 2 or otherwise makes an incorrect use of the authorization.

Article 23

Validity of proof of origin

1. A proof of origin shall be valid for four months from the date of issue in the exporting country, and must be submitted within the said period to the customs authorities of the importing country.
2. Proofs of origin which are submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying preferential treatment, where the failure to submit these documents by the final date set is due to exceptional circumstances.
3. In other cases of belated presentation, the customs authorities of the importing country may accept the proofs of origin where the products have been submitted before the said final date.

 Article 24

Submission of proof of origin

Proofs of origin shall be submitted to the customs authorities of the importing country in accordance with the procedures applicable in that Party. The said authorities may require a translation of a proof of origin and may also require the import declaration to be accompanied by a statement from the importer to the effect that the products meet the conditions required for the implementation of the Agreement.

Article 25

Importation by installments

Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing country, dismantled or non-assembled products within the meaning of General Rule 2(a) of the Harmonized System falling within Sections XVI and XVII or heading Nos. 7308 and 9406 of the Harmonized System are imported by installments, a single proof of origin for such products shall be submitted to the customs authorities upon importation of the first installment.

Article 26

Exemptions from proof of origin

1. Products sent as small packages from private persons to private persons or forming part of travelers' personal luggage shall be admitted as originating products without requiring the submission of a proof of origin, provided that such products are not imported by way of trade and have been declared as meeting the requirements of this Protocol and where there is no doubt as to the veracity of such a declaration. In the case of products sent by post, this declaration can be made on the customs declaration C2/CP3 or on a sheet of paper annexed to that document.
2. Imports which are occasional and consist solely of products for the personal use of the recipients or travelers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view.
3. Furthermore, the total value of these products must not exceed ECU 500 in the case of small packages or ECU 1200 in the case of products forming part of travelers' personal luggage.

 Article 27

Supporting documents

The documents referred to in Articles 17(3) and 21(3) used for the purpose of proving that products covered by a movement certificate EUR.1 or an invoice declaration can be considered as products originating in Latvia, Turkey or in one of the other countries referred to in Article 4 and fulfill the other requirements of this Protocol may consist inter alia of the following:

1. direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained for example in his accounts or internal bookkeeping;
2. documents proving the originating status of materials used, issued or made out in Latvia or Turkey where these documents are used in accordance with domestic law;
3. documents proving the working or processing of materials in Latvia or Turkey, issued or made out in Latvia or Turkey, where these documents are used in accordance with domestic law;
4. movement certificates EUR.1 or invoice declarations proving the originating status of materials used, issued or made out in Latvia or Turkey in accordance with this Protocol, or in one of the other countries referred to in Article 4, in accordance with rules of origin which are identical to the rules in this Protocol.

Article 28

Preservation of proof of origin and supporting documents

1. The exporter applying for the issue of a movement certificate EUR.1 shall keep for at least three years the documents referred to in Article 17(3).
2. The exporter making out an invoice declaration shall keep for at least three years a copy of this invoice declaration as well as the documents referred to in Article 21(3).
3. The customs authorities of the exporting country issuing a movement certificate EUR.1 shall keep for at least three years the application form referred to in Article 17(2).
4. The customs authorities of the importing country shall keep for at least three years the movement certificates EUR.1 and the invoice declarations submitted to them.

 Article 29

Discrepancies and formal errors

1. The discovery of slight discrepancies between the statements made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that this document does correspond to the products submitted.
2. Obvious formal errors such as typing errors on a proof of origin should not cause this document to be rejected if these errors are not such as to create doubts concerning the correctness of the statements made in this document.

Article 30

Amounts expressed in ECU

1. Amounts in the national currency of the exporting country equivalent to the amounts expressed in ECU shall be fixed by the exporting country and communicated to the importing country.
2. When the amounts exceed the corresponding amounts fixed by the importing country, the latter shall accept them if the products are invoiced in the currency of the exporting country. When the products are invoiced in the currency of another country referred to in Article 4, the importing country shall recognize the amount notified by the country concerned.
3. The amounts to be used in any given national currency shall be the equivalent in that national currency of the amounts expressed in ECU as at the first working day in October 1996.
4. The amounts expressed in ECU and their equivalents in the national currencies of Latvia and Turkey shall be reviewed by the Joint Committee at the request of Latvia or Turkey. When carrying out this review, the Joint Committee shall ensure that there will be no decrease in the amounts to be used in any national currency and shall furthermore consider the desirability of preserving the effects of the limits concerned in real terms. For this purpose, it may decide to modify the amounts expressed in ECU.

 

 TITLE VI

ARRANGEMENTS FOR ADMINISTRATIVE COOPERATION

Article 31

Mutual assistance

1. The customs authorities of Latvia and of Turkey shall provide each other with specimen impressions of stamps used in their customs offices for the issue of movement certificates EUR.1 and with the addresses of the customs authorities responsible for verifying those certificates and invoice declarations.
2. In order to ensure the proper application of this Protocol, Latvia and Turkey shall assist each other, through the competent customs administrations, in checking the authenticity of the movement certificates EUR.1 or the invoice declarations and the correctness of the information given in these documents.

Article 32

Verification of proofs of origin

1. Subsequent verifications of proofs of origin shall be carried out at random or whenever the customs authorities of the importing country have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or the fulfillment of the other requirements of this Protocol.
2. For the purposes of implementing the provisions of paragraph 1, the customs authorities of the importing country shall return the movement certificate EUR.1 and the invoice, if it has been submitted, the invoice declaration, or a copy of these documents, to the customs authorities of the exporting country giving, where appropriate, the reasons for the enquiry. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification.
3. The verification shall be carried out by the customs authorities of the exporting country. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate.
4. If the customs authorities of the importing country decide to suspend the granting of preferential treatment to the products concerned while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures judged necessary.
5. The customs authorities requesting the verification shall be informed of the results of this verification as soon as possible. These results must indicate clearly whether the documents are authentic and whether the products concerned can be considered as products originating in Latvia, Turkey or one of the other countries referred to in Article 4 and fulfill the other requirements of this Protocol.
6. If in cases of reasonable doubt there is no reply within ten months of the date of the verification request or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, the requesting customs authorities shall, except in exceptional circumstances, refuse entitlement to the preferences.

Article 33

Dispute settlement

Where disputes arise in relation to the verification procedures of Article 32 which cannot be settled between the customs authorities requesting a verification and the customs authorities responsible for carrying out this verification or where they raise a question as to the interpretation of this Protocol, they shall be submitted to the Joint Committee.

In all cases the settlement of disputes between the importer and the customs authorities of the importing country shall be under the legislation of the said Party.

Article 34

Penalties

Penalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains incorrect information for the purpose of obtaining a preferential treatment for products.

Article 35

Free Zones

1. Latvia and Turkey shall take all necessary steps to ensure that products traded under cover of a proof of origin which in the course of transport use a free zone situated in their territory, are not substituted by other goods and do not undergo handling other than normal operations designed to prevent their deterioration.
2. By means of an exemption to the provisions contained in paragraph 1, when products originating in Latvia or Turkey are imported into a free zone under cover of a proof of origin and undergo treatment or processing, the authorities concerned shall issue a new EUR.1 certificate at the exporter's request, if the treatment or processing undergone is in conformity with the provisions of this Protocol.

 TITLE VII

FINAL PROVISIONS

Article 36

Sub-Committee on customs and origin matters

A Sub-Committee on customs and origin matters shall be set up under the Joint Committee to assist it in carrying out its duties and to ensure a continuous information and consultation processed between experts.

It shall be composed of experts from both Parties responsible for questions related to customs and origin matters.

Article 37

Annexes

The Annexes to this Protocol shall form an integral part thereof.

Article 38

Amendments to the Protocol

The Joint Committee may decide to amend the provisions of this Protocol.

JOINT DECLARATION ON PROTOCOL C

 

Having regard to the Decision No 1/95 of the EC - Turkey Association Council on the Customs Union and the Agreement on Free Trade and Trade Related Matters between the European Communities and Latvia;

Considering that an extended system of cumulation shall enable the use of materials originating in Turkey, Latvia, the EC, Poland, Hungary, the Czech Republic, the Slovak Republic, Bulgaria, Romania, Lithuania, Estonia, Slovenia, Iceland, Norway or Switzerland in order to facilitate trade, prevent possible trade diversions and improve the effectiveness of respective arrangements on trade among these countries;

The Parties hereby declare that, related provisions of the Protocol C concerning the EC, Hungary, Poland, the Czech Republic, the Slovak Republic, Bulgaria, Romania, Lithuania, Estonia, Slovenia, Iceland, Norway or Switzerland shall be applicable after concluding agreements by Turkey and Latvia or after amending related Articles of the existing agreements with these countries and exchanging of letters between Turkey and Latvia about implementation thereof. Taking into consideration the Customs Union between Turkey and the EC, necessary arrangement should be made accordingly. Turkey shall inform Latvian side on the progress made in this respect between Turkey and the EC.

ANNEX I

INTRODUCTORY NOTES TO THE LIST IN ANNEX II

Note 1:

The list sets out the conditions required for all products to be considered as sufficiently worked or processed within the meaning of Article 6 of the Protocol.

Note 2:

2.1 The first two columns in the list describe the product obtained. The first column gives the heading number or chapter number used in the Harmonized System and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns a rule is specified in columns 3 or 4. Where, in some cases, the entry in the first column is preceded by an 'ex', this signifies that the rules in columns 3 or 4 apply only to the part of that heading as described in column 2.

2.2 Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in columns 3 or 4 apply to all products which, under the Harmonized System, are classified in headings of the chapter or in any of the headings grouped together in column 1.

2.3 Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in columns 3 or 4.

2.4 Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt, as an alternative, to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 has to be applied.

Note 3:

3.1 The provisions of Article 6 of the Protocol concerning products having acquired originating status which are used in the manufacture of other products apply regardless of whether this status has been acquired inside the factory where these products are used or in another factory in Latvia or in Turkey.

Example:

An engine of heading No 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 per cent of the ex-works price, is made from "other alloy steel roughly shaped by forging" of heading No ex 7224.

If this forging has been forged in Turkey from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading No ex 7224 in the list. The forging can then count as originating in the value calculation for the engine regardless of whether it was produced in the same factory or in another factory in Turkey. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used.

3.2 The rule in the list represents the minimum amount of working or processing required and the carrying out of more working or processing also confers originating status; conversely, the carrying out of less working or processing cannot confer originating status. Thus if a rule provides that non-originating material at a certain level of manufacture may be used, the use of such material at an earlier stage of manufacture is allowed and the use of such material at a later stage is not.

3.3 Without prejudice to Note 3.2 where a rule states that "materials of any heading" may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression "manufacture from materials of any heading, including other materials of heading No ... " means that only materials classified in the same heading as the product of a different description than that of the product as given in column 2 of the list may be used.

3.4 When a rule in the list specifies that a product may be manufactured from more than one material, this means that any one or more materials may be used. It does not require that all be used.

Example:

The rule for fabrics of heading Nos 5208 to 5212 provides that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other or both.

3.5 Where a rule in the list specifies that a product must be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule. (See also Note 6.2 below in relation to textiles).

Example:

The rule for prepared foods of heading No. 1904 which specifically excludes the use of cereals and their derivatives does not prevent the use of mineral salts, chemicals and other additives which are not products from cereals.

However, this does not apply to products which, although they cannot be manufactured from the particular material specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture.

Example:

In the case of an article of apparel of ex Chapter 62 made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth - even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn - that is the fibre stage.

3.6 Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then these percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the highest of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials they apply to.

Note 4:

4.1 The term "natural fibres" is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres that have been carded, combed or otherwise processed but not spun.

4.2 The term "natural fibres" includes horsehair of heading No 0503, silk of heading Nos 5002 and 5003 as well as the wool fibres, fine or coarse animal hair of heading Nos 5101 to 5105, the cotton fibres of heading Nos 5201 to 5203 and the other vegetable fibres of heading Nos 5301 to 5305.

4.3 The terms "textile pulp", "chemical materials" and "paper-making materials" are used in the list to describe the materials not classified in Chapters 50 to 63, which can be used to manufacture artificial, synthetic or paper fibres or yarns.

4.4 The term "man-made staple fibres" is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of heading Nos 5501 to 5507.

Note 5:

5.1 Where for a given product in the list a reference is made to this note, the conditions set out in column 3 shall not be applied to any basic textile materials, used in the manufacture of this product, which, taken together, represent 10 per cent or less of the total weight of all the basic textile materials used. (See also Notes 5.3 and 5.4 below).

5.2 However, the tolerance mentioned in Note 5.1 may only be applied to mixed products which have been made from two or more basic textile materials.

The following are the basic textile materials:

- silk,

- wool,

- coarse animal hair,

- fine animal hair,

- horsehair,

- cotton,

- paper-making materials and paper,

- flax,

- true hemp,

- jute and other textile bast fibres,

- sisal and other textile fibres of the genus Agave,

- coconut, abaca, ramie and other vegetable textile fibres,

- synthetic man-made filaments,

- artificial man-made filaments,

- synthetic man-made staple fibres of polypropylene,

- synthetic man-made staple fibres of polyester,

- synthetic man-made staple fibres of polyamide,

- synthetic man-made staple fibres of polyacrylonitrile,

- synthetic man-made staple fibres of polytetrafluoroethylene,

- synthetic man-made staple fibres of polyphenylene sulphide,

- synthetic man-made staple fibres of polyvinyl chloride,

- other synthetic man-made staple fibres,

- artificial man-made staple fibres of viscose,

- other artificial man-made staple fibres,

- yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped,

- yarn made of polyurethane segmented with flexible segments of polyester whether or not gimped,

- products of heading No 5605 (metallized yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film ,

- other products of heading No 5605.

Example:

A yarn of heading No 5205 made from cotton fibres of heading No 5203 and synthetic staple fibres of heading No 5506 is a mixed yarn. Therefore, non-originating synthetic staple fibres that do not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) may be used up to a weight of 10 per cent of the yarn.

Example:

A woollen fabric of heading No 5112 made from woollen yarn of heading No 5107 and synthetic yarn of staple fibres of heading No 5509 is a mixed fabric. Therefore synthetic yarn which does not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) or woollen yarn that does not satisfy the origin rules (which require manufacture from natural fibres, not carded or combed or otherwise prepared

for spinning) or a combination of the two may be used provided their total weight does not exceed 10 per cent of the weight of the fabric.

Example:

Tufted textile fabric of heading No 5802 made from cotton yarn of heading No 5205 and cotton fabric of heading No 5210 is only a mixed product if the cotton fabric is itself a mixed fabric being made from yarns classified in two separate headings or if the cotton yarns used are themselves mixtures.

Example:

If the tufted textile fabric concerned had been made from cotton yarn of heading No 5205 and synthetic fabric of heading No 5407, then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is accordingly a mixed product.

Example:

A carpet with tufts made from both artificial yarns and cotton yarns and with a jute backing is a mixed product because three basic textile materials are used. Thus, any non-originating materials that are at a later stage of manufacture than the rule allows may be used, provided their total weight does not exceed 10 per cent of the weight of the textile materials of the carpet. Thus, both the jute backing and/or the artificial yarns could be imported at that stage of manufacture, provided the weight conditions are met.

5.3 In the case of products incorporating "yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped" this tolerance is 20 per cent in respect of this yarn.

5.4 In the case of products incorporating "strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of an adhesive between two layers of plastic film", this tolerance is 30 per cent in respect of this strip.

Note 6:

6.1 In the case of those textile products which are marked in the list by a footnote referring to this note, textile materials, with the exception of linings and interlinings, which do not satisfy the rule set out in the list in column 3 for the made-up product concerned may be used provided that they are classified in a heading other than that of the product and that their value does not exceed 8 per cent of the ex-works price of the product.

6.2 Without prejudice to Note 6.3, materials which are not classified within Chapters 50 to 63 may be used freely in the manufacture of textile products, whether or not they contain textiles.

Example:

If a rule in the list provides that for a particular textile item, such as trousers, yarn must be used, this does not prevent the use of metal items, such as buttons, because buttons are not classified within Chapters 50 to 63. For the same reason, it does not prevent the use of slide-fasteners even though slide-fasteners normally contain textiles.

6.3 Where a percentage rule applies, the value of materials which are not classified within Chapters 50 to 63 must be taken into account when calculating the value of the non-originating materials incorporated.

Note 7

7.1 For the purposes of heading Nos ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, the "specific processes" are the following:

(a) vacuum distillation;

(b) redistillation by a very thorough fractionation process;

(c) cracking;

(d) reforming;

(e) extraction by means of selective solvents;

(f) the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralization with alkaline agents; decolorization and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g) polymerization;

(h) alkylation;

(i) isomerization.

7.2 For the purposes of heading Nos 2710, 2711 and 2712, the "specific processes" are the following:

(a) vacuum distillation;

(b) redistillation by a very thorough fractionation process ¹ ;

(c) cracking;

(d) reforming;

(e) extraction by means of selective solvents;

(f) the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralization with alkaline agents; decolorization and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g) polymerization;

(h) alkylation;

(ij) isomerization;

(k) in respect of heavy oils falling within heading No ex 2710 only, desulphurization with hydrogen resulting in a reduction of at least 85 per cent of the sulphur content of the products processed (ASTM D 1266-59 T method);

(l) in respect of products falling within heading No 2710 only, deparaffining by a process other than filtering;

(m) in respect of heavy oils falling within heading No ex 2710 only, treatment with hydrogen at a pressure of more than 20 bar and a temperature of more than 250°C with the use of a catalyst, other than to effect desulphurization, when the hydrogen constitutes an active element in a chemical reaction. The further treatment with hydrogen of lubricating oils of heading No ex 2710 (e.g. hydrofinishing or decolorization) in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;

(n) in respect of fuel oils falling within heading No ex 2710 only, atmospheric distillation, on condition that less than 30 per cent of these products distil, by volume, including losses, at 300°C by the ASTM D 86 method;

(o) in respect of heavy oils other than gas oils and fuel oils falling within heading No ex 2710 only, treatment by means of a high-frequency electrical brush-discharge.

7.3 For the purposes of heading Nos ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, simple operations such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, any combination of these operations or like operations do not confer origin.

 

ANNEX II TO PROTOCOL C

 

LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER THAT THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS

 

The products mentioned in the list may not all be covered by the Agreement.

It is therefore necessary to consult the other parts of the Agreements

 

HS heading No:		Description of product		Working or processing carried out on non-originating materials that confers originating status
(1)		(2)		(3) or (4)
Chapter 01	Live animals		All the animals of Chapter 1 used must be wholly obtained
Chapter 02	Meat and edible meat offal		Manufacture in which all the materials of Chapters 1 and 2 used must be wholly obtained
Chapter 03	Fish and crustaceans, molluscs and other aquatic invertebrates		Manufacture in which all the materials of Chapter 3 used must be wholly obtained
ex Chapter 04	Dairy produce; birds' eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for:		Manufacture in which all the materials of Chapter 4 used must be wholly obtained
0403	Buttermilk, curdled milk and cream, yoghurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa		Manufacture in which: - all the materials of Chapter 4 used must be wholly obtained; - any fruit juice (except those of pineapple, lime or grapefruit) of heading No 2009 used must already be originating; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
ex Chapter 05	Products of animal origin, not elsewhere specified or included; except for:		Manufacture in which all the materials of Chapter 5 used must be wholly obtained
ex 0502	Prepared pigs', hogs' or boars' bristles and hair		Cleaning, disinfecting, sorting and straightening of bristles and hair
Chapter 06	Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage		Manufacture in which: - all the materials of Chapter 6 used must be wholly obtained; - the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 07	Edible vegetables and certain roots and tubers		Manufacture in which all the materials of Chapter 7 used must be wholly obtained
Chapter 08	Edible fruit and nuts; peel of citrus fruits or melons		Manufacture in which: - all the fruit and nuts used must be wholly obtained; - the value of any materials of Chapter 17 used does not exceed 30 % of the value of the ex-works price of the product
ex Chapter 09	Coffee, tea, maté and spices; except for:		Manufacture in which all the materials of Chapter 9 used must be wholly obtained
0901	Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportion		Manufacture from materials of any heading
0902	Tea, whether or not flavoured		Manufacture from materials of any heading
ex 0910	Mixtures of spices		Manufacture from materials of any heading
Chapter 10	Cereals		Manufacture in which all the materials of Chapter 10 used must be wholly obtained
ex Chapter 11	Products of the milling industry; malt; starches; inulin; wheat gluten; except for:		Manufacture in which all the cereals, edible vegetables, roots and tubers of heading No 0714 or fruit used must be wholly obtained
ex 1106	Flour, meal and powder of the dried, shelled leguminous vegetables of heading No 0713		Drying and milling of leguminous vegetables of heading No 0708
Chapter 12	Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder		Manufacture in which all the materials of Chapter 12 used must be wholly obtained
1301	Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)		Manufacture in which the value of any materials of heading No 1301 used may not exceed 50% of the ex-works price of the product
1302	Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:
	- Mucilages and thickeners, modified, derived from vegetable products		Manufacture from non-modified mucilages and thickeners
	- Other		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 14	Vegetable plaiting materials; vegetable products not elsewhere specified or included		Manufacture in which all the materials of Chapter 14 used must be wholly obtained
ex Chapter 15	Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animals or vegetable waxes; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
1501	Pig fat (including lard) and poultry fat, other than that of heading No. 0209 or 1503:
	- Fats from bones or waste		Manufacture from materials of any heading except those of heading Nos 0203, 0206 or 0207 or bones of heading No 0506
	- Other		Manufacture from meat or edible offal of swine of heading No 0203 or 0206 or of meat and edible offal of poultry of heading No 0207
1502	Fats of bovine animals, sheep or goats, other than those of heading No. 1503:
	- Fats from bones or waste		Manufacture from materials of any heading except those of heading Nos 0201, 0202, 0204 or 0206 or bones of heading No 0506
	- Other		Manufacture in which all the materials of Chapter 2 used must be wholly obtained
1504	Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified:
	- Solid fractions		Manufacture from materials of any heading including other materials of heading No 1504
	- Other		Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained
ex 1505	Refined lanolin		Manufacture from crude wool grease of heading No 1505
1506	Other animals fats and oils and their fractions, whether or not refined, but not chemically modified:
	- Solid fractions		Manufacture from materials of any heading including other materials of heading No 1506
	- Other		Manufacture in which all the materials of Chapter 2 used must be wholly obtained
1507 to 1515	Vegetable oils and their fractions:
	- Soya, ground nut, palm, copra, palm kernel, babassu, tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption		Manufacture in which all the materials used are classified within a heading other than that of the product
	- Solid fractions, except for that of jojoba oil		Manufacture from other materials of heading Nos. 1507 to 1515
	- Other		Manufacture in which all the vegetable materials used must be wholly obtained
1516	Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinized, whether or not refined, but not further prepared		Manufacture in which: - all the materials of Chapter 2 used must be wholly obtained; - all the vegetable materials used must be wholly obtained. However, materials of headings 1507, 1508, 1511 and 1513 may be used
1517	Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading No 1516		Manufacture in which: - all the materials of Chapters 2 and 4 used must be wholly obtained; - all the vegetable materials used must be wholly obtained. However, materials of headings 1507, 1508, 1511 and 1513 may be used
Chapter 16	Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates		Manufacture from animals of Chapter 1. All the materials of Chapter 3 used must be wholly obtained
ex Chapter 17	Sugars and sugar confectionery; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 1701	Cane or beet sugar and chemically pure sucrose, in solid form, flavoured or coloured		Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
1702	Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel:
	- Chemically pure maltose and fructose		Manufacture from materials of any heading including other materials of heading No 1702
	- Other sugars in solid form, flavoured or coloured		Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
	- Other		Manufacture in which all the materials used must already be originating
ex 1703	Molasses resulting from the extraction or refining of sugar, flavoured or coloured		Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
1704	Sugar confectionery (including white chocolate), not containing cocoa		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
Chapter 18	Cocoa and cocoa preparations		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
1901	Malt extract; food preparations of flour, meal, starch or malt extract, not containing cocoa or containing less than 40% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading Nos. 0401 to 0404, not containing cocoa or containing less than 5% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:
	- Malt extract		Manufacture from cereals of Chapter 10
	- Other		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
1902	Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared:
	- Containing 20% or less by weight of meat, meat offal, fish, crustaceans or molluscs		Manufacture in which all the cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained
	- Containing more than 20% by weight of meat, meat offal, fish, crustaceans or molluscs		Manufacture in which: - all cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained; - all the materials of Chapters 2 and 3 used must be wholly obtained
1903	Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or in similar forms		Manufacture from materials of any heading except potato starch of heading No. 1108
1904	Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals, other than maize (corn) in grain form, or in the form of flakes or other worked grains (except flour and meal), pre-cooked, or otherwise prepared, not elsewhere specified or included		Manufacture: - from materials not classified within heading No 1806; - in which all the cereals and flour (except durum wheat and its derivates) used must be wholly obtained; - in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
1905	Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products		Manufacture from materials of any heading except those of Chapter 11
ex Chapter 20	Preparations of vegetables, fruit, nuts or other parts of plants; except for:		Manufacture in which all the fruit, nuts or vegetables used must be wholly obtained
ex 2001	Yams, sweet potatoes and similar edible parts of plants containing 5% or more by weight of starch, prepared or preserved by vinegar or acetic acid		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2004 and ex 2005	Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid		Manufacture in which all the materials used are classified within a heading other than that of the product
2006	Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallized)		Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
2007	Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, being cooked preparations, whether or not containing added sugar or other sweetening matter		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
ex 2008	- Nuts, not containing added sugar or spirits		Manufacture in which the value of the originating nuts and oil seeds of heading Nos 0801, 0802 and 1202 to 1207 used exceeds 60% of the ex-works price of the product
	- Peanut butter; mixtures based on cereals; palm hearts; maize (corn)		Manufacture in which all the materials used are classified within a heading other than that of the product
	- Other except for fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
2009	Fruit juices and vegetable juices (including grape must), unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
ex Chapter 21	Miscellaneous edible preparations; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
2101	Extracts, essences and concentrates, of coffee, tea, maté, roasted chicory and other coffee substitutes		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - all the chicory used must be wholly obtained
2103	Sauces and preparations therefor; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard:
	- Sauces and preparations therefor; mixed condiments and mixed seasonings		Manufacture in which all the materials used are classified within a heading other than that of the product. However, mustard flour or meal or prepared mustard may be used
	- Mustard flour and meal and prepared mustard		Manufacture from materials of any heading
ex 2104	Soups and broths and preparations therefor		Manufacture from materials of any heading except prepared or preserved vegetables of heading Nos 2002 to 2005
2106	Food preparations not elsewhere specified or included		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product
ex Chapter 22	Beverages, spirits and vinegar; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - all the grapes or any material derived from grapes used must be wholly obtained
2202	Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading No 2009		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product; - any fruit juice used (except for pineapple, lime and grapefruit juices) must already be originating
2208	Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80% vol; spirits, liqueurs and other spirituous beverages		Manufacture: - from materials not classified within heading Nos 2207 or 2208; - in which all the grapes or any material derived from grapes used must be wholly obtained or if all the other materials used are already originating, arrack may be used up to a limit of 5% by volume
ex Chapter 23	Residues and waste from the food industries; prepared animal fodder; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2301	Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption		Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained
ex 2303	Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40% by weight		Manufacture in which all the maize used must be wholly obtained
ex 2306	Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3% of olive oil		Manufacture in which all the olives used must be wholly obtained
2309	Preparations of a kind used in animal feeding		Manufacture in which: - all the cereals, sugar or molasses, meat or milk used must already be originating; - all the materials of Chapter 3 used must be wholly obtained
ex Chapter 24	Tobacco and manufactured tobacco substitutes; except for:		Manufacture in which all the materials of Chapter 24 used must be wholly obtained
2402	Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes		Manufacture in which at least 70% by weight of the unmanufactured tobacco or tobacco refuse of heading No 2401 used must already be originating
ex 2403	Smoking tobacco		Manufacture in which at least 70% by weight of the unmanufactured tobacco or tobacco refuse of heading No 2401 used must already be originating
ex Chapter 25	Salt; sulphur; earths and stone; plastering materials; lime and cement; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2504	Natural crystalline graphite, with enriched carbon content, purified and ground		Enriching of the carbon content, purifying and grinding of crude crystalline graphite
ex 2515	Marble, merely cut by sawing or otherwise into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm		Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm
ex 2516	Granite, porphyry, basalt, sandstone and other monumental and building stone, merely cut by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm		Cutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding 25 cm
ex 2518	Calcined dolomite		Calcination of dolomite not calcined
ex 2519	Crushed natural magnesium carbonate (magnesite), in hermetically sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia		Manufacture in which all the materials used are classified within a heading other than that of the product. However, natural magnesium carbonate (magnesite) may be used
ex 2520	Plasters specially prepared for dentistry		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 2524	Natural asbestos fibres		Manufacture from asbestos concentrate
ex 2525	Mica powder		Grinding of mica or mica waste
ex 2530	Earth colours, calcined or powdered		Calcination or grinding of earth colours
Chapter 26	Ores, slag and ash		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 27	Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2707	Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65% by volume distils at a temperature of up to 250°C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
ex 2709	Crude oils obtained from bituminous minerals		Destructive distillation of bituminous materials
2710	Petroleum oils and oils obtained from bituminous materials, other than crude; preparations not elsewhere specified or included, containing by weight 70% or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparations		Operations of refining and/or one or more specific process(es)2 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
2711	Petroleum gases and other gaseous hydrocarbons		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
2712	Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes and similar products obtained by synthesis or by other processes, whether or not coloured		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
2713	Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materials		Operations of refining and/or one or more specific process(es)2 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
2714	Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
2715	Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
ex Chapter 28	Inorganic chemicals; organic or inorganic compounds or precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 2805	"Mischmetall"		Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 2811	Sulphur trioxide		Manufacture from sulphur dioxide		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 2833	Aluminium sulphate		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 2840	Sodium perborate		Manufacture from disodium tetraborate pentahydrate		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 29	Organic chemicals; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 2901	Acyclic hydrocarbons for use as power or heating fuels		Operations of refining and/or one or more specific process(es)1 or
			Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
ex 2902	Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used, provided their value does not exceed 50% of the ex-works price of the product
ex 2905	Metal alcoholates of alcohols of this heading and of ethanol or glycerol		Manufacture from materials of any heading, including other materials of heading No 2905. However, metal alcoholates of this heading may be used, provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
2915	Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives		Manufacture from materials of any heading. However, the value of all the materials of headings Nos 2915 and 2916 used may not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 2932	- Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives       - Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives		Manufacture from materials of any heading. However, the value of all the materials of heading No 2909 used may not exceed 20% of the ex-works price of the product Manufacture from materials of any heading		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
2933	Heterocyclic compounds with nitrogen hetero-atom(s) only		Manufacture from materials of any heading. However, the value of all the materials of headings Nos 2932 and 2933 used may not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
2934	Nucleic acids and their salts; other heterocyclic compounds		Manufacture from materials of any heading. However, the value of all the materials of headings Nos 2932, 2933 and 2934 used may not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 30	Pharmaceutical products; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product
3002	Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera and other blood fractions and modified immunological products whether or not obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products:
	- Products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packings for retail sale		Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product
	- Other:
	-- human blood		Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product
	-- animal blood prepared for therapeutic or prophylactic uses		Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product
	-- blood fractions other than antisera, haemoglobin and serum globulin		Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product
	-- haemoglobin, blood globulin and serum globulin		Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product
	-- other		Manufacture from materials of any heading, including other materials of heading No 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product
3003 and 3004	Medicaments (excluding goods of heading Nos 3002, 3005 or 3006):
	- Obtained from amikacin of heading No 2941                 - Other		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials of heading No 3003 or 3004 may be used provided their value, taken together, does not exceed 20 % of the ex works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, materials of heading No 3003 or 3004 may be used provided their value, taken together, does not exceed 20% of the ex-works price of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
ex Chapter 31	Fertilizers; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3105	Mineral or chemical fertilizers containing two or three of the fertilizing elements nitrogen, phosphorous and potassium; other fertilizers; goods of this Chapter, in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for: - sodium nitrate - calcium cyanamide - potassium sulphate - magnesium potassium sulphate		Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 32	Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3201	Tannins and their salts, esters, ethers, and other derivatives		Manufacture from tanning extracts of vegetable origin		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3205	Colour lakes; preparations as specified in Note 3 to this Chapter based on colour lakes1		Manufacture from materials of any heading, except headings Nos 3203, 3204 and 3205. However, materials from heading No 3205 may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 33	Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3301	Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils		Manufacture from materials of any heading, including materials of a different "group"2 in this heading. However, materials of the same group may be used, provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 34	Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, "dental waxes" and dental preparations with a basis of plaster; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3403	Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, provided they represent less than 70% by weight		Operations of refining and/or one or more specific process(es)1 or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
3404	Artificial waxes and prepared waxes: - With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product
	- Other		Manufacture from materials of any heading, except: - hydrogenated oils having the character of waxes of heading No 1516;		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
			- fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading No 3823;
			- materials of heading No 3404
			However, these materials may be used provided their value does not exceed 20% of the ex-works price of the product
ex Chapter 35	Albuminoidal substances; modified starches; glues; enzymes; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3505	Dextrins and other modified starches (for example, pregelatinized or esterified starches); glues based on starches, or on dextrins or other modified starches:
	- Starch ethers and esters		Manufacture from materials of any heading, including other materials of heading No 3505		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture from materials of any heading, except those of heading No 1108		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3507	Prepared enzymes not elsewhere specified or included		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 36	Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 37	Photographic or cinematographic goods; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3701	Photographic plates and film in the flat, sensitized, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitized, unexposed, whether or not in packs:
	- Instant print film for colour photography, in packs		Manufacture in which all the materials used are classified within a heading other than heading Nos 3701 or 3702. However, materials from heading No 3702 may be used provided their value does not exceed 30% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture in which all the materials used are classified within a heading other than heading No 3701 or 3702. However, materials from heading Nos 3701 and 3702 may be used provided their value taken together, does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3702	Photographic film in rolls, sensitized, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitized, unexposed		Manufacture in which all the materials used are classified within a heading other than heading Nos 3701 or 3702		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3704	Photographic plates, film paper, paperboard and textiles, exposed but not developed		Manufacture in which all the materials used are classified within a heading other than heading Nos 3701 to 3704		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 38	Miscellaneous chemical products; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3801	- Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
	- Graphite in paste form, being a mixture of more than 30% by weight of graphite with mineral oils		Manufacture in which the value of all the materials of heading No 3403 used does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3803	Refined tall oil		Refining of crude tall oil		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3805	Spirits of sulphate turpentine, purified		Purification by distillation or refining of raw spirits of sulphate turpentine		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3806	Ester gums		Manufacture from resin acids		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 3807	Wood pitch (wood tar pitch)		Distillation of wood tar		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
3808	Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms of packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the products
3809	Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the products
3810	Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the products
3811	Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:
	- Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals		Manufacture in which the value of all the materials of heading No 3811 used does not exceed 50% of the ex-works price of the product
	- Other		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3812	Prepared rubber accelerators; compound plasticizers for rubber or plastics, not elsewhere specified or included; anti-oxidizing preparations and other compound stabilizers for rubber or plastics		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3813	Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3814	Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or vanish removers		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3818	Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3819	Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3820	Anti-freezing preparations and prepared de-icing fluids		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3822	Diagnostic or laboratory reagents on a backing and prepared diagnostic or laboratory reagents, whether or not on a backing, other than those of heading No. 3002 or 3006		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3823	Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols.
	- Industrial monocarboxylic fatty acids, acid oils from refining		Manufacture in which all the materials used are classified within a heading other than that of the product
	- Industrial fatty alcohols		Manufacture from materials of any heading including other materials of heading No. 3823
3824	Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:
	- The following of this heading: Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol other than that of heading No 2905		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes
	Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing
	- Other		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3901 to 3915	Plastics in primary forms, waste, parings and scrap, of plastic; except for heading Nos ex 3907 and 3912 for which the rules are set out below:
	- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content		Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product; - the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product1		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
	- Other		Manufacture in which the value of the materials of Chapter 39 used does not exceed 20% of the ex-works price of the product1		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
ex 3907	- Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)		Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product1
	- Polyester		Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)
3912	Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms		Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20% of the ex-works price of the product
3916 to 3921	Semi-manufactures and articles of plastics; except for headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below:
	- Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked - Other:		Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
	-- Addition homopolymerization products in which a single monomer contributes more than 99% by weight to the total polymer content		Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product; - the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product1		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
	-- Other		Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product1		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
ex 3916 and ex 3917	Profile shapes and tubes		Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product; - the value of any materials classified within the same heading as the product does not exceed 20% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
ex 3920	- Ionomer sheet or film		Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralized with metal ions, mainly zinc and sodium		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
	- Sheets of regenerated cellulose, polyamides or polyethylene		Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20% of the ex-works price of the product
ex 3921	Foils of plastic, metallized		Manufacture from highly transparent polyester foils with a thickness of less than 23 micron1		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
3922 to 3926	Articles of plastics		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex Chapter 40	Rubber and articles thereof; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4001	Laminated slabs or crepe rubber for shoes		Lamination of sheets of natural rubber
4005	Compound rubber, unvulcanized, in primary forms or in plates, sheets or strip		Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50% of the ex-works price of the product
4012	Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, interchangeable tyre treads and tyre flaps, of rubber:
	- Retreaded pneumatic, solid or cushion tyres, of rubber		Retreading of used tyres
	- Other		Manufacture from materials of any heading, except those of heading Nos 4011 or 4012
ex 4017	Articles of hard rubber		Manufacture from hard rubber
ex Chapter 41	Raw hides and skins (other than furskins) and leather; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4102	Raw skins of sheep or lambs, without wool on		Removal of wool from sheep or lamb skins, with wool on
4104 to 4107	Leather, without hair or wool, other than leather of heading Nos 4108 or 4109		Retanning of pre-tanned leather or Manufacture in which all the materials used are classified within a heading other than that of the product
4109	Patent leather and patent laminated leather; metallized leather		Manufacture from leather of heading Nos 4104 to 4107 provided its value does not exceed 50% of the ex-works price of the product
Chapter 42	Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 43	Furskins and artificial fur; manufactures thereof; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4302	Tanned or dressed furskins, assembled:
	- Plates, crosses and similar forms		Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins
	- Other		Manufacture from non-assembled, tanned or dressed furskins
4303	Articles of apparel, clothing accessories and other articles of furskin		Manufacture from non-assembled tanned or dressed furskins of heading No 4302
ex Chapter 44	Wood and articles of wood; wood charcoal; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4403	Wood roughly squared		Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down
ex 4407	Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or finger-jointed		Planing, sanding or finger-jointing
ex 4408	Veneer sheets and sheets for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or finger-jointed		Splicing, planing, sanding or finger-jointing
ex 4409	Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed: - Sanded or fingerjointed		Sanding or fingerjointing
	- Beadings and mouldings		Beading or moulding
ex 4410 to ex 4413	Beadings and mouldings, including moulded skirting and other moulded boards		Beading or moulding
ex 4415	Packing cases, boxes, crates, drums and similar packings, of wood		Manufacture from boards not cut to size
ex 4416	Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood		Manufacture from riven staves, not further worked than sawn on the two principal surfaces
ex 4418	- Builders' joinery and carpentry of wood		Manufacture in which all the materials used are classified within a heading other than that of the product. However, cellular wood panels, shingles and shakes may be used
	- Beadings and mouldings		Beading or moulding
ex 4421	Match splints; wooden pegs or pins for footwear		Manufacture from wood of any heading except drawn wood of heading No 4409
ex Chapter 45	Cork and articles of cork; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
4503	Articles of natural cork		Manufacture from cork of heading No 4501
Chapter 46	Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork		Manufacture in which all the materials used are classified within a heading other than that of the product
Chapter 47	Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 48	Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4811	Paper and paperboard, ruled, lined or squared only		Manufacture from paper-making materials of Chapter 47
4816	Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading No 4809), duplicator stencils and offset plates, of paper, whether or not put up in boxes		Manufacture from paper-making materials of Chapter 47
4817	Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery		Manufacturing in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 4818	Toilet paper		Manufacture from paper-making materials of Chapter 47
ex 4819	Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 4820	Letter pads		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 4823	Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape		Manufacture from paper-making materials of Chapter 47
ex Chapter 49	Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
4909	Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings		Manufacture from materials not classified within heading Nos 4909 or 4911
4910	Calendars of any kind, printed, including calendar blocks:
	- Calendars of the "perpetual" type or with replaceable blocks mounted on bases other than paper or paperboard		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
	- Other		Manufacture from materials not classified in heading Nos 4909 or 4911
ex Chapter 50	Silk; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 5003	Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed		Carding or combing of silk waste
5004 to ex 5006	Silk yarn and yarn spun from silk waste		Manufacture from1 : - raw silk or silk waste carded or combed or otherwise prepared for spinning, - other natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials
5007	Woven fabrics of silk or of silk waste:
	- Incorporating rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1:
			- coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or
			Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
ex Chapter 51	Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
5106 to 5110	Yarn of wool, of fine or coarse animal hair or of horsehair		Manufacture from1 : - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials
5111 to 5113	Woven fabrics of wool, of fine or coarse animal hair or of horsehair:
	- Incorporating rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1:
			- coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper
			or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
ex Chapter 52	Cotton; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
5204 to 5207	Yarn and thread of cotton		Manufacture from1: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials
5208 to 5212	Woven fabrics of cotton:
	- Incorporating rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1:
			- coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper
			or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
ex Chapter 53	Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
5306 to 5308	Yarn of other vegetable textile fibres; paper yarn		Manufacture from1: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials
5309 to 5311	Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn:
	- Incorporating rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper
			or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
5401 to 5406	Yarn, monofilament and thread of man-made filaments		Manufacture from1: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials
5407 and 5408	Woven fabrics of man-made filament yarn:
	- Incorporating rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1:
			- coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper
			or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
5501 to 5507	Man-made staple fibres		Manufacture from chemical materials or textile pulp
5508 to 5511	Yarn and sewing thread of man-made staple fibres		Manufacture from1: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials
5512 to 5516	Woven fabrics of man-made staple fibres:
	- Incorporating rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1 : - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper
			or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
ex Chapter 56	Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for:		Manufacture from1 : - coir yarn, - natural fibres, - chemical materials or textile pulp, or - paper making materials
5602	Felt, whether or not impregnated, coated, covered or laminated:
	- Needleloom felt		Manufacture from 1: - natural fibres, - chemical materials or textile pulp
			However: - polypropylene filament of heading No 5402, - polypropylene fibres of heading No 5503 or 5506 or - polypropylene filament tow of heading No 5501, of which the denomination in all cases of a single filament or fibre is less than 9 decitex may be used provided their value does not exceed 40% of the ex-works price of the product
	- Other		Manufacture from1: - natural fibres, - man-made staple fibres made from casein, or - chemical materials or textile pulp
5604	Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading No 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics:
	- Rubber thread and cord, textile covered		Manufacture from rubber thread or cord, not textile covered
	- Other		Manufacture from1: - natural fibres not carded or combed or otherwise processed for spinning, - chemical materials or textile pulp, or - paper-making materials
5605	Metallized yarn, whether or not gimped, being textile yarn, or strip or the like of heading No 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal		Manufacture from1 : - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, - chemical materials or textile pulp, or - paper-making materials
5606	Gimped yarn, and strip and the like of heading No 5404 or 5405 , gimped (other than those of heading No 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn		Manufacture from1: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, - chemical materials or textile pulp, or - paper-making materials
Chapter 57	Carpets and other textile floor coverings:
	- Of needleloom felt		Manufacture from1: - natural fibres, or - chemical materials or textile pulp However:
			- polypropylene filament of heading No 5402, - polypropylene fibres of heading No 5503 or 5506 or - polypropylene filament tow of heading No 5501, of which the denomination in all cases of a single filament or fibre is less than 9 decitex may be used provided their value does not exceed 40% of the ex-works price of the product
	- Of other felt		Manufacture from1: - natural fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
	- Other		Manufacture from1: - coir yarn, - synthetic or artificial filament yarn, - natural fibres, or - man-made staple fibres not carded or combed or otherwise processed for spinning
ex Chapter 58	Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for:
	- Combined with rubber thread		Manufacture from single yarn1
	- Other		Manufacture from1:
			- natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp,
			or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
5805	Hand-woven tapestries of the types gobelins, flanders, aubusson, beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up		Manufacture in which all the materials used are classified within a heading other than that of the product
5810	Embroidery in the piece, in strips or in motifs		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
5901	Textile fabrics coated with gum or amylaceous substances of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations		Manufacture from yarn
5902	Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon:
	- Containing not more than 90 % by weight of textile materials		Manufacture from yarn
	- Other		Manufacture from chemical materials or textile pulp
5903	Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading No 5902		Manufacture from yarn or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
5904	Linoleum, whether or note cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape		Manufacture from yarn1
5905	Textile wall coverings:
	- Impregnated, coated, covered or laminated with rubber, plastics or other materials		Manufacture from yarn
	- Other		Manufacture from1:
			- coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp, or
			Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
5906	Rubberized textile fabrics, other than those of heading No 5902:
	- Knitted or crocheted fabrics		Manufacture from1 : - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
	- Other fabrics made of synthetic filament yarn, containing more than 90% by weight of textile materials		Manufacture from chemical materials
	- Other		Manufacture from yarn
5907	Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio backcloths or the like		Manufacture from yarn or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5% of the ex-works price of the product
5908	Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefore, whether or not impregnated:
	- Incandescent gas mantles, impregnated		Manufacture from tubular knitted gas mantle fabric
	- Other		Manufacture in which all the materials used are classified within a heading other than that of the product
5909 to 5911	Textile articles of a kind suitable for industrial use: - Polishing discs or rings other than of felt of heading No 5911   - Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading No 5911		Manufacture from yarn or waste fabrics or rags of heading No 6310 Manufacture from: - coir yarn, - the following materials: - yarn of polytetrafluoro-ethylene, - yarn, multiple, of polyamide, coated impregnated or covered with a phenolic resin, - yarn of synthetic textile fibres of aromatic polyamides, obtained by polycondensation of m-phenylenediamine and isophthalic acid, - monofil of polytetrafluoroethylene2 - yarn of synthetic textile fibres of poly-p-phenylene terephthalamide, - glass fibre yarn, coated with phenol resin and gimped with acrylic yarn2 - copolyester monofilaments of a polyester and a resin of terephthalic acid and 1,4 cyclohexanedimethanol and isophthalic acid, - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
	- Other		Manufacture from1: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
Chapter 60	Knitted or crocheted fabrics		Manufacture from1: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
Chapter 61	Articles of apparel and clothing accessories, knitted or crocheted:
	- Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form		Manufacture from yarn1,2
	- Other		Manufacture from1 : - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
ex Chapter 62	Articles of apparel and clothing accessories, not knitted or crocheted; except for:		Manufacture from yarn1,2
ex 6202, ex 6204, ex 6206, ex 6209 and ex 6211	Women's, girls' and babies' clothing and clothing accessories for babies, embroidered		Manufacture from yarn1 or Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product1
ex 6210 and ex 6216	Fire-resistant equipment of fabric covered with foil of aluminized polyester		Manufacture from yarn1 or Manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40% of the ex-works price of the product1
6213 and 6214	Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:
	- Embroidered		Manufacture from unbleached single yarn1,2 or Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product1
	- Other		Manufacture from unbleached single yarn1,2 or Making up followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatizing, impregnating, mending and burling) where the value of the unprinted goods of heading Nos 6213 and 6214 used does not exceed 47.5% of the ex-works price of the product
6217	Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading No 6212:
	- Embroidered		Manufacture from yarn1 or Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product1
	- Fire resistant equipment of fabric covered with foil of aluminized polyester		Manufacture from yarn1 or Manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40% of the ex-works price of the product1
	- Interlinings for collars and cuffs, cut out		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture from yarn1
ex Chapter 63	Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
6301 to 6304	Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles:
	- Of felt, of non-wovens		Manufacture from3 : - natural fibres, or - chemical materials or textile pulp
	- Other:
	-- Embroidered		Manufacture from unbleached single yarn1,2 or Manufacture from unembroidered fabric (other than knitted or crocheted) provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product
	-- Other		Manufacture from unbleached single yarn1,2
6305	Sacks and bags, of a kind used for the packing of goods		Manufacture from1: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp
6306	Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods:
	- Of non-wovens		Manufacture from 1,2: - natural fibres, or - chemical materials or textile pulp
	- Other		Manufacture from unbleached single yarn1,2
6307	Other made-up articles, including dress patterns		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
6308	Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes or similar textile articles, put up in packings for retail sale		Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated provided their total value does not exceed 15% of the ex-works price of the set
ex Chapter 64	Footwear; gaiters and the like; except for:		Manufacture from materials of any heading except for assemblies of uppers affixed to inner soles or to other sole components of heading No 6406
6406	Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 65	Headgear and parts thereof, except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
6503	Felt hats and other felt headgear, made from the hat bodies, hoods or plateaux of heading No 6501, whether or not lined or trimmed		Manufacture from yarn or textile fibres1
6505	Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hair-nets of any material, whether or not lined or trimmed		Manufacture from yarn or textile fibres1
ex Chapter 66	Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops and parts thereof; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
6601	Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas)		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 67	Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 68	Articles of stone, plaster, cement, asbestos, mica or similar materials; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 6803	Articles of slate or of agglomerated slate		Manufacture from worked slate
ex 6812	Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate		Manufacture from materials of any heading
ex 6814	Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials		Manufacture from worked mica (including agglomerated or reconstituted mica)
Chapter 69	Ceramic products		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 70	Glass and glassware; except for :		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7003 ex 7004 and ex 7005	Glass with a non-reflecting layer		Manufacture from materials of heading No. 7001
7006	Glass of heading No 7003, 7004 or 7005, bent, edgeworked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials		Manufacture from materials of heading No 7001
7007	Safety glass, consisting of toughened (tempered) or laminated glass		Manufacture from materials of heading No 7001
7008	Multiple-walled insulating units of glass		Manufacture from materials of heading No 7001
7009	Glass mirrors, whether or not framed, including rear-view mirrors		Manufacture from materials of heading No 7001
7010	Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass		Manufacture in which all the materials used are classified within a heading other than that of the product or Cutting of glassware, provided the value of the uncut glassware does not exceed 50% of the ex-works price of the product
7013	Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading No 7010 or 7018)		Manufacture in which all the materials used are classified within a heading other than that of the product or Cutting of glassware, provided the value of the uncut glassware does not exceed 50% of the ex-works price of the product or Hand-decoration (with the exception of silk-screen printing) of hand-blown glassware, provided the value of the hand-blown glassware does not exceed 50% of the ex-works price of the product
ex 7019	Articles (other than yarn) of glass fibres		Manufacture from: - uncoloured slivers, rovings, yarn or chopped strands, or - glass wool
ex Chapter 71	Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7101	Natural or cultured pearls, graded and temporarily strung for convenience of transport		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 7102, ex 7103 and ex 7104	Worked precious or semi-precious stones (natural, synthetic or reconstructed)		Manufacture from unworked precious or semi-precious stones
7106, 7108 and 7110	Precious metals:
	- Unwrought		Manufacture from materials not classified within heading No 7106, 7108 or 7110 or Electrolytic, thermal or chemical separation of precious metals of heading No 7106, 7108 or 7110 or Alloying of precious metals of heading No 7106, 7108 or 7110 with each other or with base metals
	- Semi-manufactured or in powder form		Manufacture from unwrought precious metals
ex 7107, ex 7109 and ex 7111	Metals clad with precious metals, semi-manufactured		Manufacture from metals clad with precious metals, unwrought
7116	Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed)		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
7117	Imitation jewellery		Manufacture in which all the materials used are classified within a heading other than that of the product or
			Manufacture from base metal parts, not plated or covered with precious metals, provided the value of all the materials used does not exceed 50% of the ex-works price of the product
ex Chapter 72	Iron and steel; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
7207	Semi-finished products of iron or non-alloy steel		Manufacture from materials of heading No 7201, 7202, 7203, 7204 or 7205
7208 to 7216	Flat rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel		Manufacture from ingots or other primary forms of heading No 7206
7217	Wire of iron or non-alloy steel		Manufacture from semi-finished materials of heading No 7207
ex 7218, 7219 to 7222	Semi-finished products, flat rolled products, bars and rods, angles, shapes and sections of stainless steel		Manufacture from ingots or other primary forms of heading No 7218
7223	Wire of stainless steel		Manufacture from semi-finished materials of heading No 7218
ex 7224, 7225 to 7228	Semi-finished products, flat rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel		Manufacture from ingots or other primary forms of heading No 7206, 7218 or 7224
7229	Wire of other alloy steel		Manufacture from semi-finished materials of heading No 7224
ex Chapter 73	Articles of iron or steel; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7301	Sheet piling		Manufacture from materials of heading No 7206
7302	Railway or tramway track construction materials of iron or steel, the following: rails, checkrails and rackrails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fishplates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails		Manufacture from materials of heading No 7206
7304, 7305 and 7306	Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel		Manufacture from materials of heading No 7206, 7207, 7218 or 7224
ex 7307	Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts		Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35% of the ex-works price of the product
7308	Structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel		Manufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading No 7301 may not be used
ex 7315	Skid chains		Manufacture in which the value of all the materials of heading No 7315 used does not exceed 50% of the ex-works price of the product
ex Chapter 74	Copper and articles thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
7401	Copper mattes; cement copper (precipitated copper)		Manufacture in which all the materials used are classified within a heading other than that of the product
7402	Unrefined copper; copper anodes for electrolytic refining		Manufacture in which all the materials used are classified within a heading other than that of the product
7403	Refined copper and copper alloys, unwrought:
	- Refined copper		Manufacture in which all the materials used are classified within a heading other than that of the product
	- Copper alloys and refined copper containing other elements		Manufacture from refined copper, unwrought, or waste and scrap of copper
7404	Copper waste and scrap		Manufacture in which all the materials used are classified within a heading other than that of the product
7405	Master alloys of copper		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 75	Nickel and articles thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
7501 to 7503	Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrap		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 76	Aluminium and articles thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
7601	Unwrought aluminium		Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
7602	Aluminium waste or scrap		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7616	Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium		Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used;
			- the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 77	Reserved for possible future use in HS
ex Chapter 78	Lead and articles thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
7801	Unwrought lead:
	- Refined lead		Manufacture from "bullion" or "work" lead
	- Other		Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading No 7802 may not be used
7802	Lead waste and scrap		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 79	Zinc and articles thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
7901	Unwrought zinc		Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading No 7902 may not be used
7902	Zinc waste and scrap		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 80	Tin and articles thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
8001	Unwrought tin		Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading No 8002 may not be used
8002 and 8007	Tin waste and scrap; other articles of tin		Manufacture in which all the materials used are classified within a heading other than that of the product
Chapter 81	Other base metals; cermets; articles thereof:
	- Other base metals, wrought; articles thereof		Manufacture in which the value of all the materials classified within the same heading as the product used does not exceed 50% of the ex-works price of the product
	- Other		Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 82	Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
8206	Tools of two or more of the heading Nos 8202 to 8205, put up in sets for retail sale		Manufacture in which all the materials used are classified within a heading other than heading Nos 8202 to 8205. However, tools of heading Nos 8202 to 8205 may be incorporated into the set provided their value does not exceed 15% of the ex-works price of the set
8207	Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product
8208	Knives and cutting blades, for machines or for mechanical appliances		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 8211	Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading No 8208		Manufacture in which all the materials used are classified within a heading other than that of the product. However, knife blades and handles of base metal may be used
8214	Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files)		Manufacture in which all the materials used are classified within a heading other than that of the product. However, handles of base metal may be used
8215	Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butterknives, sugar tongs and similar kitchen or tableware		Manufacture in which all the materials used are classified within a heading other than that of the product. However, handles of base metal may be used
ex Chapter 83	Miscellaneous articles of base metal; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 8302	Other mountings, fittings and similar articles suitable for buildings, and automatic door closers		Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8302 may be used provided their value does not exceed 20% of the ex-works price of the product
ex 8306	Statuettes and other ornaments, of base metal		Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No 8306 may be used provided their value does not exceed 30% of the ex-works price of the product
ex Chapter 84	Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 8401	Nuclear fuel elements		Manufacture in which all the materials used are classified within a heading other than that of the product1		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8402	Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super heated water boilers		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8403 and ex 8404	Central heating boilers other than those of heading No 8402 and auxiliary plant for central heating boilers		Manufacture in which all the materials used are classified within a heading other than heading No 8403 or 8404		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8406	Steam turbines and other vapour turbines		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8407	Spark-ignition reciprocating or rotary internal combustion piston engines		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8408	Compression-ignition internal combustion piston engines (diesel or semi-diesel engines)		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8409	Parts suitable for use solely or principally with the engines of heading No 8407 or 8408		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8411	Turbo-jets, turbo propellers and other gas turbines		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8412	Other engines and motors		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 8413	Rotary positive displacement pumps		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
ex 8414	Industrial fans, blowers and the like		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8415	Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8418	Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading No 8415		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product; - the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
ex 8419	Machines for wood, paper pulp and paperboard industries		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8420	Calendering or other rolling machines, other than for metals or glass, and cylinders therefor		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8423	Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8425 to 8428	Lifting, handling, loading or unloading machinery		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8431 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8429	Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:
	- Road rollers		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8431 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8430	Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the value of the materials classified within heading No 8431 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 8431	Parts suitable for use solely or principally with road rollers		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8439	Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8441	Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8444 to 8447	Machines of these headings for use in the textile industry		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 8448	Auxiliary machinery for use with machines of headings Nos 8444 and 8445		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8452	Sewing machines, other than book-sewing machines of heading No 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles:
	- Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used in assembling the head (without motor) does not exceed the value of the originating materials used; - the thread tension, crochet and zigzag mechanisms used are already originating
	- Other		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8456 to 8466	Machine-tools and machines and their parts and accessories of headings Nos 8456 to 8466		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8469 to 8472	Office machines (for example, typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines)		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8480	Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
8482	Ball or roller bearings		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8484	Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8485	Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this Chapter		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 85	Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for:		Manufacture in which - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8501	Electric motors and generators (excluding generating sets)		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8503 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8502	Electric generating sets and rotary converters		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8501 or 8503, taken together, are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 8504	Power supply units for automatic data-processing machines		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 8518	Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; audio-frequency electric amplifiers; electric sound amplifier sets		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8519	Turntables (record-decks), record-players, cassette- players and other sound reproducing apparatus, not incorporating a sound recording device		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8520	Magnetic tape recorders and other sound recording apparatus, whether or not incorporating a sound reproducing device		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8521	Video recording or reproducing apparatus, whether or not incorporating a video tuner		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8522	Parts and accessories suitable for use solely or principally with the apparatus of heading Nos 8519 to 8521		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8523	Prepared unrecorded media for sound recording or similar recording of other phenomena, other than products of Chapter 37		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8524	Records, tapes and other recorded media for sound or other similarly recorded phenomena, including matrices and masters for the production of records, but excluding products of Chapter 37:
	- Matrices and masters for the production of records		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8523 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8525	Transmission apparatus for radio-telephony, radio-telegraphy, radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras; still image video cameras and other video camera recorders		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8526	Radar apparatus, radio navigational aid apparatus and radio remote control apparatus		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8527	Reception apparatus for radio-telephony, radio-telegraphy or radio broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8528	Reception apparatus for television, whether or not incorporating radio broadcast receivers or sound or video recording or reproducing apparatus; video monitors and video projectors		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8529	Parts suitable for use solely or principally with the apparatus of heading Nos 8525 to 8528:
	- Suitable for use solely or principally with video recording or reproducing apparatus		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8535 and 8536	Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8537	Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No 8517		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8538 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 8541	Diodes, transistors and similar semi-conductor devices, except wafers not yet cut into chips		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8542	Electronic integrated circuits and microassemblies		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 8541 or 8542, taken together, are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
8544	Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8545	Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8546	Electrical insulators of any material		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8547	Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly other than insulators of heading No 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8548	Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 86	Railway or tramway locomotives, rolling stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signaling equipment of all kinds; except for:		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8608	Railway or tramway track fixtures and fittings; mechanical (including electro-mechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex Chapter 87	Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for:		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8709	Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8710	Tanks and other armoured fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8711	Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars:
	- With reciprocating internal combustion piston engine of a cylinder capacity:
	-- Not exceeding 50 cc		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex- works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 20% of the ex-works price of the product
	-- Exceeding 50 cc		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
	- Other		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 8712	Bicycles without ball bearings		Manufacture from materials not classified in heading No 8714		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8715	Baby carriages and parts thereof		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
8716	Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex Chapter 88	Aircraft, spacecraft, and parts thereof; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 8804	Rotochutes		Manufacture from materials of any heading including other materials of heading No 8804		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
8805	Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles		Manufacture in which all the materials used are classified within a heading other than that of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
Chapter 89	Ships, boats and floating structures		Manufacture in which all the materials used are classified within a heading other than that of the product. However, hulls of heading No 8906 may not be used		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 90	Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for:		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9001	Optical fibres and optical fibre bundles; optical fibre cables other than those of heading No 8544; sheets and plates of polarizing material, lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9002	Lenses, prisms, mirrors and other optical elements, of any materials, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9004	Spectacles, goggles and the like, corrective, protective or other		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 9005	Binoculars, monoculars, other optical telescopes, and mountings therefor, except for astronomical refracting telescopes and mountings therefor		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product; - the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 9006	Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product; - the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9007	Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product; - the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9011	Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product; - the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
ex 9014	Other navigational instruments and appliances		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9015	Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9016	Balances of a sensitivity of 5 cg or better, with or without weights		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9017	Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this Chapter		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9018	Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments:
	- Dentists' chairs incorporating dental appliances or dentists' spittoons		Manufacture from materials of any heading, including other materials of heading No 9018		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
9019	Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
9020	Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product
9024	Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics)		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9025	Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9026	Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading No 9014, 9015, 9028 or 9032		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9027	Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9028	Gas, liquid or electricity supply or production meters, including calibrating meters therefor:
	- Parts and accessories		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9029	Revolution counters, production counters, taximeters, milometers, pedometers and the like; speed indicators and tachometers, other than those of heading Nos 9014 or 9015; stroboscopes		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9030	Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9031	Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter; profile projectors		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9032	Automatic regulating or controlling instruments and apparatus		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9033	Parts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex Chapter 91	Clocks and watches and parts thereof; except for:		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
9105	Other clocks		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9109	Clock movements, complete and assembled		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where the value of all the non-originating materials used does not exceed the value of the originating materials used		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9110	Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements		Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product; - where, within the above limit, the materials classified within heading No 9114 are only used up to a value of 10% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9111	Watch cases and parts thereof		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9112	Clock cases and cases of a similar type for other goods of this Chapter, and parts thereof		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 40% of the ex-works price of the product		Manufacture in which the value of all the materials used does not exceed 30% of the ex-works price of the product
9113	Watch straps, watch bands and watch bracelets, and parts thereof:
	- Of base metal, whether or not plated, or of clad precious metal		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	- Other		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 92	Musical instruments; parts and accessories of such articles		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
Chapter 93	Arms and ammunition; parts and accessories thereof		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex Chapter 94	Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like; prefabricated buildings; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product		Manufacture in which the value of all the materials used does not exceed 40% of the ex works price of the product
ex 9401 and ex 9403	Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or less		Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture from cotton cloth already made up in a form ready for use of heading No 9401 or 9403, provided:		Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
			- its value does not exceed 25% of the ex-works price of the product; - all the other materials used are already originating and are classified in a heading other than heading No 9401 or 9403
9405	Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
9406	Prefabricated buildings		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
ex Chapter 95	Toys, games and sports requisites; parts and accessories thereof; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
9503	Other toys; reduced-size ("scale") models and similar recreational models, working or not; puzzles of all kinds		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 9506	Golf clubs and parts thereof		Manufacture in which all the materials used are classified within a heading other than that of the product. However, roughly shaped blocks for making golf club heads may be used
ex Chapter 96	Miscellaneous manufactured articles; except for:		Manufacture in which all the materials used are classified within a heading other than that of the product
ex 9601 and ex 9602	Articles of animal, vegetable or mineral carving materials		Manufacture from "worked" carving materials of the same heading
ex 9603	Brooms and brushes (except for besoms and the like and brushes made from marten or squirrel hair), hand-operated mechanical floor sweepers, not motorized, paint pads and rollers, squeegees and mops		Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
9605	Travel sets for personal toilet, sewing or shoe or clothes cleaning		Each item in the set must satisfy the rule, which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided their total value does not exceed 15% of the ex-works price of the set
9606	Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
9612	Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes		Manufacture in which: - all the materials used are classified within a heading other than that of the product; - the value of all the materials used does not exceed 50% of the ex-works price of the product
ex 9613	Lighters with piezo-igniter		Manufacture in which the value of all the materials of heading No 9613 used does not exceed 30% of the ex-works price of the product
ex 9614	Smoking pipes and pipe bowls		Manufacture from roughly shaped blocks
Chapter 97	Works of art, collectors' pieces and antiques		Manufacture in which all the materials used are classified within a heading other than that of the product

ANNEX III

MOVEMENT CWERTIFICATE EUR.1 AND APPLICATION FOR MOVEMENT CERTIFICATE EUR.1

Printing instructions

1. Each form shall measure 210 x 297 mm; a tolerance of up to minus 5 mm or plus 8 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m ² . It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.
2. The competent authorities of Turkey and of Latvia may reserve the right to print the forms themselves or may have them printed by approved printers. In the latter case, each form must include a reference to such approval. Each form must bear name and address of the printer or a mark by which the printer can be identified, It shall also bear a serial number, either printed or not, by which in can be identified.
3.  
4. MOVEMENT CERTIFICATE

1. Exporter (name, full address, country)	EUR.1 No A 000.000
	See notes overleaf before completing this form
	2. Certificate used in preferential trade between   ..............................................................
3. Consignee (name, full address, country) (Optional)	and .............................................................. (insert appropriate countries, groups of countries or territories)
	4. Country, group of countries or territory in which the products are considered as originating	5. Country, group of countries or territory of destination
6. Transport details (Optional)	7. Remarks

 

8. Item number; Marks and numbers; Number and kind of package ; Description of goods			9. Gross weight (kg) or other measure (litres,m3,etc.)	10.Invoices (Optional)
11. CUSTOMS ENDORSEMENT Declaration certified Export document Form No Customs office Issuing country or territory . Date . (Signature)	Stamp	12. DECLARATION BY THE EXPORTER I, the undersigned, declare that the goods described above meet the conditions required for the issue of this certificate.     Place and date (Signature)

13. Request for verification , to:	14. Result of verification
	Verification carried out shows that this certificate (*) was issued by the customs office indicated and that the information contained therein is accurate. does not meet the requirements as to authenticity and accuracy (see remarks appended).
Verification of the authenticity and accurancy of this certificate is requested     (Place and date)     Stamp     (Signature)	(Place and date)     Stamp     (Signature) (*) Insert X in the appropriate box.

 NOTES

1. Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the customs authorities of the issuing country or territory.

2. No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible.

3. Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified.

APPLICATION FOR A MOVEMENT CERTIFICATE

1. Exporter (name, full address, country)	EUR.1 No A 000.000
	See notes oveerleaf before completing this form
	2. Application for a certificate to be used in preferential trade between ................................................................................
3. Consignee (name, full address, country) (Optional)	and   ................................................................................ (insert appropriate countries or groups of countries or territories)
	4. Country, group of countries or territory in which the products are considered as originating		5. Country, group of countries or territory of destination
6. Transport details (Optional)	7. Remarks
8. Item number; Marks and numbers; Number and kind of packages 1; Description of goods		9. Gross weight (kg) or other measure (litres,m3,etc.)		10.Invoices (Optional)

_____________________

¹ If goods are not packed, indicate number of articles or state “in link” as appropriate

DECLARATION BY THE EXPORTER

I, the undersigned, exporter of the goods described overleaf,

DECLARE that the goods meet the conditions required for the issue of the attached certificate;

SPECIFY as follows the circumstances which have enabled these goods to meet the above conditions:

SUBMIT the following supporting documents 1 :

UNDERTAKE to submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspections of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities;

REQUEST the issue of the attached certificate for these goods.

 

(Signature)

ANNEX IV

INVOICE DECLARATION

The invoice declaration, the text of which is given below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reprodeced.

Turkish version:

Ebu belge (Gü mrü k Onay No: ..... 1 ) kapsam? ndaki maddelerin ihracat? ? s? , aksi a? ? k? a belirtilmedik? e, bu maddelerin ...... 2 tercihli men? ? ? unu beyan eder.

Latvian version:

Eksportētājs, produktiem, kuri ietverti tajā dokumentā (muitas pilnvara Nr. ..... ¹ ) deklarē, ka izņemot tur, kur ir citādi skaidri noteikts, tiem produktiem ir priekšrocību izcelsme no ..... ² .

English version:

The exporter of the products covered by this document (customs authorization No .... ¹ ) declares that, except where otherwise clearly indicated, these products are of ..... preferential origin ² .